Selected Body Type

Service Body

Applied Filters

Body Types

  • Upfitted Cargo Van

    Upfitted Cargo Van wireframe image
  • Service Truck

    Service Truck wireframe image
  • Service Utility Van

    Service Utility Van wireframe image
  • Flatbed Truck

    Flatbed Truck wireframe image
  • Stake Bed

    Stake Bed wireframe image
  • Dump Truck

    Dump Truck wireframe image
  • Box Truck

    Box Truck wireframe image
  • Mechanics Body

    Mechanics Body wireframe image
  • Contractor Truck

    Contractor Truck wireframe image
  • Chipper Truck

    Chipper Truck wireframe image
  • Landscape Dump

    Landscape Dump wireframe image
  • Crane Body

    Crane Body wireframe image
  • Concrete Body

  • Combo Body

    Combo Body wireframe image
  • Box Van

    Box Van wireframe image
  • Dovetail Landscape

    Dovetail Landscape wireframe image
  • Welder Body

    Welder Body wireframe image
  • Water Truck

  • Hooklift Body

    Hooklift Body wireframe image
  • Step Van / Walk-in

    Step Van / Walk-in wireframe image
  • Glass Body

    Glass Body wireframe image
  • Plow Truck

    Plow Truck wireframe image
  • Bucket Truck

    Bucket Truck wireframe image
  • Refrigerated Body

    Refrigerated Body wireframe image
  • Hauler Body

    Hauler Body wireframe image
  • Saw Body

    Saw Body wireframe image
  • Rollback Body

    Rollback Body wireframe image
  • Wrecker Body

    Wrecker Body wireframe image
  • Sweeper Truck

    Sweeper Truck wireframe image
  • Spray Truck

  • Shuttle Bus

    Shuttle Bus wireframe image
  • Fuel Lube Truck

  • Adrian Steel

    Adrian Steel logo image
  • Knapheide

    Knapheide logo image
  • Monroe Truck Equipment

    Monroe Truck Equipment logo image
  • Morgan Truck Body

    Morgan Truck Body logo image
  • PJ's

    PJ's logo image
  • Reading

    Reading logo image
  • Royal Truck Body

    Royal Truck Body logo image
  • Scelzi

    Scelzi logo image
  • Smyrna Truck

    Smyrna Truck logo image
  • Supreme

    Supreme logo image
  • Switch-N-Go

    Switch-N-Go logo image
  • Unicell

    Unicell logo image
  • Utilimaster

    Utilimaster logo image
  • ABI Fabrication (Avery Barron)

    ABI Fabrication (Avery Barron) logo image
  • Air-Flo

    Air-Flo logo image
  • American Cargo by Midway

    American Cargo by Midway logo image
  • Auto Crane

    Auto Crane logo image
  • Bay Bridge

    Bay Bridge logo image
  • F. Barkow

    F. Barkow logo image
  • Bedrock

    Bedrock logo image
  • BOSS

    BOSS logo image
  • BrandFX

    BrandFX logo image
  • Buyers

    Buyers logo image
  • Cadet Truck Bodies

    Cadet Truck Bodies logo image
  • Carrier

    Carrier logo image
  • CM Truck Beds

    CM Truck Beds logo image
  • Commercial Truck & Van Equipment

    Commercial Truck & Van Equipment logo image
  • Crysteel

    Crysteel logo image
  • Custom Truck Body & Equipment

    Custom Truck Body & Equipment logo image
  • Dejana Truck & Utility Equipment

    Dejana Truck & Utility Equipment logo image
  • DownEaster

    DownEaster logo image
  • Galion

    Galion logo image
  • DuraClass

    DuraClass logo image
  • DuraMag

    DuraMag logo image
  • Blue Ridge Manufacturing

    Blue Ridge Manufacturing logo image
  • Easterner

    Easterner logo image
  • M H EBY

    M H EBY logo image
  • Economy MFG Co.

    Economy MFG Co. logo image
  • Enoven

    Enoven logo image
  • Fisher

    Fisher logo image
  • General Truck Body

    General Truck Body logo image
  • Gladiator Trailer Service

    Gladiator Trailer Service logo image
  • Godwin

    Godwin logo image
  • Harbor

    Harbor logo image
  • Heiser

    Heiser logo image
  • Hillsboro

    Hillsboro logo image
  • Iroquois

    Iroquois logo image
  • Jerr-Dan

    Jerr-Dan logo image
  • Kidron

    Kidron logo image
  • Kilar Fabrication

    Kilar Fabrication logo image
  • Maintainer

    Maintainer logo image
  • Marathon

    Marathon logo image
  • Martin

    Martin logo image
  • Masterack

    Masterack logo image
  • Mickey Truck Bodies

    Mickey Truck Bodies logo image
  • Miller Industries

    Miller Industries logo image
  • NiteHawk Sweepers

    NiteHawk Sweepers logo image
  • Norstar

    Norstar logo image
  • Palfinger

    Palfinger logo image
  • Ranger Design

    Ranger Design logo image
  • Real Fleet Solutions

    Real Fleet Solutions logo image
  • RKI

    RKI logo image
  • Rockport

    Rockport logo image
  • Rugby

    Rugby logo image
  • SH Truck Bodies

    SH Truck Bodies logo image
  • Sortimo

    Sortimo logo image
  • SpaceKap

    SpaceKap logo image
  • Stahl

    Stahl logo image
  • Starcraft Bus

    Starcraft Bus logo image
  • Stellar Industries

    Stellar Industries logo image
  • Summit Body

    Summit Body logo image
  • Sun Country Truck

    Sun Country Truck logo image
  • Thermo King

    Thermo King logo image
  • Taylor Pump & Lift

    Taylor Pump & Lift logo image
  • TruckCraft

    TruckCraft logo image
  • Warner

    Warner logo image
  • VanTech

    VanTech logo image
  • Venco Venturo

    Venco Venturo logo image
  • U.S. Truck Body

    U.S. Truck Body logo image
  • UTEM

    UTEM logo image
  • The Utility Bodywerks

    The Utility Bodywerks logo image
  • Voth Truck Bodies

    Voth Truck Bodies logo image
  • Wabash

    Wabash logo image
  • Warren Truck Equipment, Inc

    Warren Truck Equipment, Inc logo image
  • Weather Guard

    Weather Guard logo image
  • Western

    Western logo image
  • Wil-Ro

    Wil-Ro logo image
  • Womack Truck Body

    Womack Truck Body logo image
  • Zanotti

    Zanotti logo image

Manufacturers and Lines

Adrian Steel

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Monroe Truck Equipment

Monroe Truck Equipment

Monroe Truck Equipment

Morgan Truck Body

Morgan Truck Body

Morgan Truck Body

Morgan Truck Body

Morgan Truck Body

PJ's

PJ's

PJ's

PJ's

PJ's

PJ's

PJ's

Reading

Reading

Reading

Reading

Reading

Reading

Reading

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Scelzi

Scelzi

Scelzi

Scelzi

Scelzi

Scelzi

Scelzi

Scelzi

Scelzi

Scelzi

Scelzi

Smyrna Truck

Supreme

Supreme

Supreme

Switch-N-Go

Switch-N-Go

Unicell

Unicell

Utilimaster

ABI Fabrication (Avery Barron)

Air-Flo

American Cargo by Midway

Auto Crane

Bay Bridge

Bay Bridge

F. Barkow

Bedrock

Bedrock

BOSS

BrandFX

Buyers

Cadet Truck Bodies

Carrier

CM Truck Beds

CM Truck Beds

CM Truck Beds

Commercial Truck & Van Equipment

Crysteel

Custom Truck Body & Equipment

Custom Truck Body & Equipment

Dejana Truck & Utility Equipment

Dejana Truck & Utility Equipment

Dejana Truck & Utility Equipment

Dejana Truck & Utility Equipment

DownEaster

DownEaster

Galion

DuraClass

DuraMag

DuraMag

Blue Ridge Manufacturing

Blue Ridge Manufacturing

Blue Ridge Manufacturing

Blue Ridge Manufacturing

Easterner

M H EBY

M H EBY

M H EBY

M H EBY

Economy MFG Co.

Enoven

Enoven

Fisher

General Truck Body

Gladiator Trailer Service

Gladiator Trailer Service

Gladiator Trailer Service

Gladiator Trailer Service

Godwin

Harbor

Harbor

Harbor

Harbor

Harbor

Harbor

Harbor

Harbor

Harbor

Heiser

Heiser

Hillsboro

Iroquois

Jerr-Dan

Jerr-Dan

Kidron

Kilar Fabrication

Maintainer

Marathon

Marathon

Martin

Masterack

Mickey Truck Bodies

Miller Industries

NiteHawk Sweepers

Norstar

Palfinger

Ranger Design

Real Fleet Solutions

RKI

Rockport

Rockport

Rockport

Rugby

Rugby

SH Truck Bodies

SH Truck Bodies

Sortimo

SpaceKap

Stahl

Starcraft Bus

Stellar Industries

Summit Body

Summit Body

Sun Country Truck

Sun Country Truck

Sun Country Truck

Thermo King

Taylor Pump & Lift

TruckCraft

Warner

VanTech

Venco Venturo

U.S. Truck Body

UTEM

The Utility Bodywerks

Voth Truck Bodies

Voth Truck Bodies

Wabash

Warren Truck Equipment, Inc

Weather Guard

Western

Wil-Ro

Womack Truck Body

Zanotti

Body Types and Lines

Upfitted Cargo Van

Service Truck

Service Utility Van

Flatbed Truck

Stake Bed

Dump Truck

Upfitted Cargo Van

Box Truck

Mechanics Body

Contractor Truck

Chipper Truck

Landscape Dump

Crane Body

Concrete Body

Combo Body

Dump Truck

Service Truck

Flatbed Truck

Box Truck

Landscape Dump

Box Van

Stake Bed

Dump Truck

Landscape Dump

Flatbed Truck

Stake Bed

Chipper Truck

Dovetail Landscape

Dump Truck

Contractor Truck

Service Truck

Service Utility Van

Dump Truck

Stake Bed

Flatbed Truck

Crane Body

Landscape Dump

Service Truck

Contractor Truck

Flatbed Truck

Landscape Dump

Combo Body

Service Utility Van

Stake Bed

Mechanics Body

Service Truck

Contractor Truck

Flatbed Truck

Combo Body

Stake Bed

Dump Truck

Welder Body

Water Truck

Landscape Dump

Chipper Truck

Mechanics Body

Box Truck

Box Van

Service Utility Van

Box Truck

Dump Truck

Hooklift Body

Box Van

Box Truck

Step Van / Walk-in

Mechanics Body

Dump Truck

Box Van

Mechanics Body

Box Van

Box Truck

Glass Body

Flatbed Truck

Service Truck

Plow Truck

Bucket Truck

Plow Truck

Flatbed Truck

Refrigerated Body

Flatbed Truck

Service Truck

Hauler Body

Flatbed Truck

Dump Truck

Stake Bed

Landscape Dump

Box Van

Box Truck

Service Utility Van

Dump Truck

Dump Truck

Hooklift Body

Dump Truck

Dump Truck

Service Truck

Dump Truck

Contractor Truck

Flatbed Truck

Landscape Dump

Dump Truck

Dump Truck

Service Truck

Box Truck

Flatbed Truck

Landscape Dump

Dovetail Landscape

Flatbed Truck

Dump Truck

Plow Truck

Flatbed Truck

Landscape Dump

Flatbed Truck

Dump Truck

Chipper Truck

Dump Truck

Service Truck

Contractor Truck

Upfitted Cargo Van

Service Utility Van

Flatbed Truck

Combo Body

Stake Bed

Saw Body

Landscape Dump

Flatbed Truck

Stake Bed

Flatbed Truck

Dump Truck

Rollback Body

Wrecker Body

Refrigerated Body

Rollback Body

Mechanics Body

Box Truck

Stake Bed

Landscape Dump

Upfitted Cargo Van

Box Truck

Rollback Body

Sweeper Truck

Flatbed Truck

Mechanics Body

Upfitted Cargo Van

Spray Truck

Service Truck

Box Van

Service Utility Van

Box Truck

Dump Truck

Landscape Dump

Dump Truck

Flatbed Truck

Upfitted Cargo Van

Service Truck

Service Truck

Shuttle Bus

Hooklift Body

Box Van

Box Truck

Flatbed Truck

Chipper Truck

Landscape Dump

Refrigerated Body

Fuel Lube Truck

Service Truck

Service Truck

Upfitted Cargo Van

Mechanics Body

Box Truck

Bucket Truck

Hauler Body

Dump Truck

Chipper Truck

Box Van

Dump Truck

Upfitted Cargo Van

Plow Truck

Dovetail Landscape

Dovetail Landscape

Refrigerated Body

Adrian Steel: Commercial Shelving

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Adrian Steel: General Service

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Adrian Steel: PHVAC

PHVAC Techs need to work in nearly every condition -- on rooftops, in basements and everywhere in-between. We’re designing the perfect upfit packages for your job that include shelving, bins, partitions, and other useful items. These packages will help you be more organized and efficient at your job.

Adrian Steel: Steel Storage Products

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs. Or, choose a pre-designed trade package to start from.

Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Knapheide: Aluminum Service Body

Our aluminum service truck beds offer the most innovative design and superior construction.

Tested in the harshest lab environments, automotive proving grounds and by customers like you, our Aluminum Service Bodies are built to perform. Additionally, military-grade aluminum and structural adhesives that ensure maximum strength and longevity for your work truck.

What does this mean for you? The corrosion resistance of aluminum, an impactful increase in payload and a truck bed as durable as steel. When it comes to Knapheide, lightweight doesn’t mean light duty.

Knapheide: KUVcc

Love the organization capabilities in a utility van, but require a truck chassis for more cab space or four-wheel drive? We’ve designed KUVcc Utility Truck Bodies just for you.

You get all the same great benefits of a KUV, but in a package that’s compatible with a truck cab chassis. With more than enough secure compartments and cargo area storage, the KUVcc can handle all of your tools, equipment and parts while keeping them separated and organized. The KUVcc features solid steel construction so you know you will get years of durable service out of this enclosed utility body.

Productivity and efficiency is vital to your success, so choose a Knapheide KUVcc to add a boost to your bottom line.

Knapheide: Steel Service Body

With a rugged steel construction and external storage for your tools and equipment, the Service Body is a key component in your day-to-day productivity.

The external compartments offer protection from outside elements and allow technicians to access their equipment without having to climb into the truck bed.

Staying organized both on and between job sites is important. Get maximum efficiency with a Knapheide Service Body.

Knapheide: KUV

Say goodbye to crawling around in the back of your cargo van endlessly searching for tools, parts and equipment. The KUV creates optimized organization for the technician, dividing the storage space into manageable compartments that are externally accessible from either side of the body.

The technician pulls up to the jobsite, exits the cab and immediately has quick access to the tools and parts they need without having to crawl into the cargo area. Dedicated conduit chutes enable the technician to store longer items without cluttering the floor of the oversized cargo area.

Knapheide's KUV is constructed of rugged galvanneal steel so the technician can have confidence it will provide years of reliable service. More contractors and technicians utilizing an enclosed utility body as their work vehicle choose a Knapheide KUV. If you spend more time searching for tools and equipment, invest in a KUV and get more billable hours out of your day.

Knapheide: Heavy-Hauler Junior

Heavy-Hauler Junior flatbed truck bodies are designed with versatility in mind to meet various vocational needs.

Knapheide's Heavy-Hauler Junior Platform Body is equipped with external rub rails, integrated tie down points and stake pockets, along with a heavy-duty bulkhead and robust flooring options. Add steel stake sides to a Heavy-Hauler Junior Platform Body to transition into a dedicated Stake Body, or choose a hoist for dumping applications. The Heavy-Hauler Junior Platform Body is designed to be multi-faceted in order to suit a wide variety of vocations.

The Heavy-Hauler Junior offers all the features you need to tackle tough jobs without breaking your budget.

Knapheide: PGNB Gooseneck

PGNB Gooseneck Bodies from Knapheide come loaded with all the same great standard features found in PGNA models (integrated gooseneck and receiver hitch systems, internal stake pockets and punched bulkhead) plus integrated stop, tail, turn and backup lights in both the rear skirt and bulkhead and side rub rails for additional functionality and convenience.

Choose models for either single or dual rear wheel chassis, along with 8', 9' and 11' body lengths. Regardless if you're hauling a horse trailer or hay bales, PGNB Gooseneck Bodies are well equipped for the task at hand.

Knapheide: PGNC Gooseneck

PGNC Gooseneck Bodies from Knapheide have distinct side-skirt styling with integrated front and rear toolboxes. The sleek yet functional design provides storage for tools, chains, tie-down straps and more.

Unlike the competition, Knapheide fully immerses all Gooseneck Bodies, including the PGNC, in an exclusive E-Coat prime paint system for the industry's best rust and corrosion protection. When you need a Gooseneck Body with proven performance, turn to the Knapheide PGNC Gooseneck Body.

Knapheide: PGND Gooseneck

Knapheide PGND Gooseneck Bodies are the top of the line. You won't find a more feature-packed and deluxe model in the industry. PGND Gooseneck Bodies feature superior and innovative solid steel construction so you have confidence it will withstand your jobsite abuse.

From the ample compartment storage to the contoured bulkhead to the all LED lights, the PGND has everything you need in a Gooseneck Body and more. The reliable under the floor gooseneck hitch system can haul even your heaviest gooseneck trailer loads.

Knapheide: PGTB Utility Gooseneck
Now featuring B&W Turnoverball® hitches rated for 30,000 lb. gross trailer weight and 7,500 tongue weight, PGTB Gooseneck Hitch Truck Beds come loaded with integrated stop, tail, turn and backup lights in both the rear skirt and bulkhead and side rub rails for exceptional functionality and convenience. Choose models for either single or dual rear wheel chassis, along with 8', 9' and 11' body lengths.

Regardless if you’re hauling a horse trailer or hay bales, PGTB Gooseneck Bodies are well-equipped for the task at hand.
Knapheide: PGTD Gooseneck

The newly redesigned Knapheide PGTD Gooseneck Bodies are the top of the line for work and hauling. Now featuring B&W Turnoverball® hitches, you won’t find a more feature-packed and deluxe gooseneck service body anywhere.

New PGTD Features:

  • B&W Turnoverball® hitch rated for 30,000 lb. gross trailer weight and 7,500 tongue weight.
  • Flip-top compartments are three inches deeper than previous PGN models for 50 percent more usable space.
  • 36” high front compartments in 11’ models are of equal width, each with 250 lb. capacity shelves.

PGTD Gooseneck Bodies feature superior and innovative solid steel construction so you have confidence it will stand up to years of use on the jobsite. From the ample compartment storage to the contoured bulkhead and all-LED lights, the PGTD has everything you need in a gooseneck body.

Knapheide: Value-Master X

Need a versatile Platform Body that can haul just about anything? Knapheide's Value-Master X Platform Body features solid steel construction and is available in many different lengths and widths to fit a variety of chassis applications.

Choose wood, steel or treadplate flooring and pick from numerous side accessories including stake sides, solid sides or refuse sides to customize for your hauling job. Pair this flatbed up with a hoist to add dumping functionality.

Regardless of your needs, the Value-Master X Platform Body from Knapheide has you covered.

Knapheide: Heavy-Hauler Junior Stake

Heavy-Hauler Junior flatbed truck bodies are designed with versatility in mind to meet various vocational needs.

Knapheide's Heavy-Hauler Junior Platform Body is equipped with external rub rails, integrated tie down points and stake pockets, along with a heavy-duty bulkhead and robust flooring options. Add steel stake sides to a Heavy-Hauler Junior Platform Body to transition into a dedicated Stake Body, or choose a hoist for dumping applications. The Heavy-Hauler Junior Platform Body is designed to be multi-faceted in order to suit a wide variety of vocations.

The Heavy-Hauler Junior offers all the features you need to tackle tough jobs without breaking your budget.

Knapheide: Value-Master X Stake CVS

Knapheide’s Value-Master X Platform Body features solid steel construction and is available in many different lengths and widths to fit a variety of chassis applications. Choose wood, steel or treadplate flooring and pick from numerous side accessories including stake sides, solid sides or refuse sides to customize for your hauling job. Pair this flatbed up with a hoist to add dumping functionality.

Regardless of your needs, the Value-Master X Platform Body from Knapheide has you covered.

Knapheide: Drop Side

Knapheide’s Drop Side Dump Body is the premier light duty dump bodies for class three to five chassis. Constructed of high-strength steel for unmatched durability and featuring a crossmemberless understructure for low maintenance and rust prevention, many industries including landscaping, lawn maintenance, construction and municipalities have come to rely on the Knapheide Drop Side Dump Body to safely and efficiently haul and dump bulk materials.

Additionally, all Knapheide Dump Bodies are fully immersed in Knapheide’s electrodeposition prime paint system to ensure corrosion resistance and reliable service. The next time you’re in the market for a light duty dump body, look no further than Knapheide’s Drop Side Dump Body.

Knapheide: Rigid Side

Our light-duty dump truck bodies aren’t built “light duty” at all. Knapheide Fixed Side Dump Bodies feature double panel, high-strength steel construction on the sides and tailgate. In addition, choose from a seven gauge or 10 gauge HRCQ steel floor.

Choose from two different styles of understructure, either stacked crossmember or crossmemberless design, depending upon your preference. Utilize the double-acting sub frame hoist for effortless dumping and bulk material spreading applications. Numerous options including underbody toolboxes and packs for secure storage, quarter or full cab shields for protection, manual or electric tarps for retaining material and many others are available to increase the functionality and productivity of your next dump body.

Choose the proven Knapheide name for your next dump body purchase.

Knapheide: KVE

The Knapheide Manufacturing Company brings the next generation of van storage solutions to today's mobile contractors. With a comprehensive lineup of van equipment, including shelving, boxes and van partitions, Knapheide Van Equipment offers the rugged equipment, van packages and vocational packages to keep you working

Knapheide: KCA

Used in a variety of industries, a box body provides many benefits for your cargo hauling needs. When keeping your cargo out of the elements and safely secured when not in transit, box bodies are an ideal choice.

Knapheide Box Bodies come with standard features to help you get the job done. With a full size rear roll-up door, cargo can be easily accessed.

Box bodies are available with .040” aluminum sidewalls or 0.5” FRP sidewalls. Aluminum sidewalls offer exposed Z posts with interior options for maximum cargo control. FRP provides a smooth outer sidewall perfect for graphic artwork, with increased interior space void of interior framing.

    Standard Features:
  • Floors are 2”x8” pine shiplap (laminated hardwood for bodies 18’ and longer)
  • Floors include 12-gauge steel side rail band structure
  • Rear threshold is 10-gauge steel with built-in drain groove to prevent water from entering cargo area
  • Corner posts are 12-gauge steel with 14-gauge reinforcement, adding extra durability
  • Standard rear roll-up door comprised of .25” composite, which features 10% lighter weight than standard wood doors with zero rot
  • 4” ICC bumper
  • .040” aluminum side walls
  • Grab handles
  • LED integrated S/T/T and B/U lights
  • Cast aluminum front corners
  • Extruded aluminum roof edging to prevent water intrusion and provide durability
  • Structural long sills with structural cross members:
    • On 16” center for bodies 17’ and shorter
    • On 12” center for bodies over 17’
  • Rear steel header reinforced with steel inner brace supports
  • One interior LED dome light (two lights in bodies 18’ and longer)
  • Fiber reinforced plastic (FRP) front wall
Knapheide: KVA

Knapheide Box Bodies come with standard features to help you get the job done. With a full size rear roll-up door, cargo can be easily accessed. Choose a Knapheide Box Truck (KBT) or Knapheide Box Van (KBV) to fit your needs.

Our box bodies are available with .040” aluminum sidewalls or 0.5” FRP sidewalls. Aluminum sidewalls offer exposed Z posts with interior options for maximum cargo control. FRP provides a smooth outer sidewall perfect for graphic artwork, with increased interior space void of interior framing

Knapheide: KMT

Rugged Knapheide Mechanics Trucks have been utilized in many different industries including heavy construction, railroads, municipalities, mining, agriculture and equipment rental. Knapheide Mechanics Trucks provide reliability, productivity and safety on the jobsite. Knapheide Mechanics Trucks are complete turnkey packages mechanics need and come to expect in a service truck.

All Mechanics Trucks from Knapheide feature a crane to perform the lifting, heavy duty mechanics drawers for organized tool storage and ample and secure storage within the side compartments. Choose from a variety of crane body lengths, electric or hydraulic cranes, compressors, welders, generators, lube packages and auxiliary lighting.

Knapheide: Contractor Body

Contractor truck bodies combine our most popular flatbed, the Value-Master X, and packages it up with options and accessories that contractors commonly desire to make their job easier.

Above and under-body toolboxes provide the contractor with easily accessible and secure tool storage. An overhead material rack accommodates for convenient storage for up to 1,500 pounds of longer materials. Side and rear stakes close off the cargo area so oversized equipment or materials won’t fall out during transport.

Select the Knapheide Contractor Body to get the most out of your work day.

Knapheide: Standard Forestry

The Knapheide Forestry Body is America’s premier chipper body packed with industry-leading features to help you get the job done.

Engineered and built for ground or aerial applications, all Knapheide Forestry Bodies are fully immersed in our exclusive electrodeposition prime paint system for superior corrosion resistance. Smooth side panels allow for maximum-sized company graphics to easily be applied. All Knapheide Forestry Bodies feature LED lighting for longevity and low maintenance.

When looking for your next forestry body, choose Knapheide, the most trusted name in the industry.

Knapheide: Landscape Dump

Knapheide’s landscape truck bed isn’t your normal Landscaper Body.

It includes optimized standard features to take your landscaping or lawn care operation to a new level. Need the ability to transfer, dump and distribute bulk materials like mulch, dirt, rock and more? The integrated dump hoist provides effortless operation while an optional metering gate enables the landscaper to easily control filling wheelbarrows. Load and haul palletized materials? A 50? side access swing out door accommodates for quick forklift loading. Add additional functionality with an optional storage pack or underbody toolbox.

If you want to upgrade your landscaping vehicle, check out the Knapheide Landscaper Body.

Knapheide: Crane Body

Knapheide Crane Bodies are built with an isolated crane compartment and understructure reinforcements in order to withstand the torsional forces applied to a body during lifting operations. Knapheide's comprehensive line-up of Crane Bodies includes models from light-duty trucks, up to extreme heavy-duty applications. From construction and mining to agriculture and equipment repair, Knapheide Crane Bodies have continually proved their worth time and time again. When your job requires some heavy lifting, call on a Knapheide Crane Body to help you get the job done.

Knapheide: Concrete

Combine a 1,500 lb. overcab material rack, drop down tailgate, removable solid sides, above and under body toolboxes with a Value-Master X Platform Body and you get the ideal vocational package for a concrete contractor.

Concrete work is a physically demanding job, so this truck body has been designed to be tough enough to handle your job day in and day out. A reinforced overcab material rack can accommodate wheelbarrow storage while the drop down tailgate enables you to get close enough to the load space to easily retrieve items. A 1/8" thick, treadplate floor construction ensures the Concrete Body can hold up to the heavy loads within a concrete environment.

If your job requires a strong truck and durable truck body, depend on Knapheide's Concrete Body.

Knapheide: Combo Body

A service combo body by Knapheide is created at the crossroads of ingenuity and efficiency. Combo Bodies combine the practicality and versatility of a service truck body and a platform flatbed truck body.

This creates an ideal storage and productivity solution for the needs of virtually any line of work nationwide. Multiple configurations of the Combo Body allow you to get the most practical upfit to meet your needs. Available configurations include DRW in 10’ and 12’ lengths, 40” tall side packs with flip tops, 46” and 60” tall side packs (no flip tops).

See why professionals across multiple industries are choosing the Combo Body to handle the demands of their jobsites.

Monroe Truck Equipment: Z-DumpPRO™

The Z-DumpPRO™ is designed to maximize efficiency, so you can haul materials with confidence, and focus on profitability.

    Specifications:
  • Lengths: 9', 11'
  • Capacity: 2-3 Yards, 3-4 Yards
  • Sides: Rigid, Fold Down
  • Side Height: 11", 16"
    Standard Features:
  • 2.5 Receiver Hitch on ICC Bumper
  • 7-Way RV Trailer Plug
  • 100% Powder Coat Finish
  • 5-Year Limited Warranty (3 Year Powder Coat)
    Z-DumpPRO™ Options:
  • 2 LED Rear Strobes - Included with Elite
  • Mini Light Bar on Self Leveling Bracket - Included with Elite
  • Poly Fenders - Included with Elite
  • Hand-Crank Tarp - Included with Elite
  • Spring Return Tarp
  • Steel, Aluminum, and Stainless Steel Underbody Toolboxes
Monroe Truck Equipment: Z-DumpPRO™ Elite

The Z-DumpPRO™ Elite is designed to maximize efficiency, so you can haul materials with confidence, and focus on profitability.

    Standard Features:
  • 2.5 Receiver Hitch on ICC Bumper
  • 7-Way RV Trailer Plug
  • 100% Powder Coat Finish
  • 2 LED Rear Strobes
  • Mini Light Bar on Self Leveling Bracket
  • Poly Fenders
  • Hand-Crank Tarp
  • 5-Year Limited Warranty (3 Year Powder Coat)
    Z-DumpPRO™ Options:
  • Spring Return Tarp
  • Steel, Aluminum, and Stainless Steel Underbody Toolboxes
Monroe Truck Equipment: Z-DumpPRO™ Premier

The Z-DumpPRO™ Premier is designed to maximize efficiency, so you can haul materials with confidence, and focus on profitability.

    Specifications:
  • Lengths: 9', 11'
  • Capacity: 2-3 Yards, 3-4 Yards
  • Sides: Rigid or Fold Down
  • Side Height: 11", 16"
    Standard Features:
  • 2.5 Receiver Hitch on ICC Bumper
  • 7-Way RV Trailer Plug
  • 100% Powder Coat Finish
  • 5-Year Limited Warranty (3 Year Powder Coat)
    Z-DumpPRO™ Premier Options:
  • 2 LED Rear Strobes - Included with Elite
  • Mini Light Bar on Self Leveling Bracket - Included with Elite
  • Poly Fenders - Included with Elite
  • Hand-Crank Tarp - Included with Elite
  • Spring Return Tarp
  • Steel, Aluminum, and Stainless Steel Underbody Toolboxes
Monroe Truck Equipment: ServicePRO™

An industry favorite service body paired with best-in-class towing. The StepMate™ bumper design allows workers to easily get the job done, while protecting their vehicle investment.

    Standard Features:
  • Length Options:
    • Steel: 98", 108", 132"
    • Aluminum: 104", 113", 137"
  • 2.5 Receiver Hitch on ICC Bumper
  • 7-Way RV Trailer Plug
  • Complete Towing System
  • Nitrogen Gas Strut Door Holders
  • StepMate™ Bumper
  • Steel and Aluminum
  • 6-Year Limited Warranty (10 Year Aluminum)
    ServicePRO™ Options
  • Aluminum Rock Guards
  • Compartment Lighting (Included with Elite and Premier) - Steel Only
  • Top Packs - Included with Elite
  • Spray On Bedliner: Bumper
  • Spray On Bedliner: Tops of Compartments
  • Spray On Bedliner: Complete Loadspace
  • 2 LED Rear Strobes / 2 LED Front Grill Strobes
  • LED Mini Light Bar
Monroe Truck Equipment: ServicePRO™ Elite

An industry favorite service body paired with best-in-class towing and lightweight protection.

The StepMate™ bumper design allows workers to easily get the job done, while protecting their vehicle investment.

    Standard Features:
  • Aluminum Top Packs
  • Aluminum Tailgate Protector
  • Power Locking System
  • Compartment Lighting - Steel Only
  • 2.5 Receiver Hitch on ICC Bumper
  • 7-Way RV Trailer Plug
  • Complete Towing System
  • Nitrogen Gas Strut Door Holders
  • StepMate™ Bumper
  • Steel and Aluminum
  • 6-Year Limited Warranty (10 Year Aluminum)
    ServicePRO™ Options
  • Aluminum Rock Guards
  • Compartment Lighting (Included with Elite and Premier) - Steel Only
  • Top Packs - Included with Elite
  • Spray On Bedliner: Bumper
  • Spray On Bedliner: Tops of Compartments
  • Spray On Bedliner: Complete Loadspace
  • 2 LED Rear Strobes / 2 LED Front Grill Strobes
  • LED Mini Light Bar
Monroe Truck Equipment: ServicePRO™ Premier

An industry favorite service body paired with best-in-class towing and safety features.

The StepMate™ bumper design allows workers to easily get the job done, while protecting their vehicle investment.

    Standard Features:
  • Power Locking System
  • 2.5 Receiver Hitch on ICC Bumper
  • 7-Way RV Trailer Plug
  • Complete Towing System
  • Nitrogen Gas Strut Door Holders
  • StepMate™ Bumper
  • Steel and Aluminum
  • Compartment Lighting - Steel Only
  • 6-Year Limited Warranty (10 Year Aluminum)
    ServicePRO™ Options
  • Aluminum Rock Guards
  • Compartment Lighting (Included with Elite and Premier) - Steel Only
  • Top Packs - Included with Elite
  • Spray On Bedliner: Bumper
  • Spray On Bedliner: Tops of Compartments
  • Spray On Bedliner: Complete Loadspace
  • 2 LED Rear Strobes / 2 LED Front Grill Strobes
  • LED Mini Light Bar
Monroe Truck Equipment: Tow 'N Haul Gooseneck

With features like skirted beds, side tool boxes, and fold-down rails, Monroe offers tow bodies to make your job easier and give you the capability to take on more jobs and projects. Built to last, our tow series enables you to keep organized, work optimally, and improve your productivity by reducing back and forth trips for tools and parts.

Monroe's mTEC™ technologies improve the experience, function, and safety of our work trucks. By working to understand the hard work that our customers go through, we strive to design innovations to create a better work truck for all.

Monroe Truck Equipment: TradesPRO™

Monroe Truck Equipment’s variety of platform bodies allow users to safely haul a variety of products and materials to and from worksites.

With different floor options, towing options, and sizes available, customers can specify the exact body features that will help them work optimally.

Maximize your capabilities reliably with multiple floor, side, and towing options – all in a single truck.

    Standard Features:
  • 2.5 Receiver Hitch on ICC Bumper
  • 7-Way RV Trailer Plug
  • Bulkhead with Window
  • 5-Year Limited Warranty
    TradesPRO™ Options
  • LED Front Grill Strobes / LED Rear Strobes
  • Steel Stake Racks (Wood, Tread Plate, and Smooth Steel Only)
  • Aluminum Stake Racks (Aluminum Body Only)
  • Steel, Aluminum, and Stainless Steel Underbody Toolboxes
  • Bulkhead Corner Filler (Wood, Tread Plate, and Smooth Steel Only; 1-Ton Trucks Only)
Morgan Truck Body: Fastrak
FAST TURNAROUND

A reputation for designing and building the best box truck bodies in the industry means top OEM's are happy to work with Morgan to deliver the truck you need — FAST. Morgan's ability to gain immediate access to top-of-the-line chassis and components, directly benefits dry freight haulers who don't have time for delays. Fast turnaround means faster return on your investment!

SIX DIFFERENT PRE-CONFIGURED MODELS

Quick turnaround is not devoid of options. Morgan builds a series of exceptional features into each of six pre-configured models. With lengths ranging from 12 to 26 feet, heights from 97 to 103 inches, and widths from 96 to 102 inches, it's easy to choose a body that meets your size specifications.

When it comes to features, Morgan provides strength and durability that supersedes the need for variety. With Fastrak, there's no need to ask for 1-1/8" laminated hardwood flooring, aerodynamic design, Poly-Tuff corner caps, a built-in rain channel, anti-snag roof-bows and built-in safety features. They're all standard Fastrak features; and further proof that Morgan knows what it takes to build the best bodies in the business.

Morgan Truck Body: Gold Star
  • SUBFRAME - 3" I-beam Crossmembers On 12" Centers With 4" Longrail , Mylar Tape Is Applied Between All Steel Subframe Components And Extruded Aluminum Lower Bottom Rails To Prevent Corrosion
  • FLOOR - 1- 1/8” Laminated Hardwood Fastened To Subframe With 2 Countersunk Screws Per Floor Board Per Cross Member In A Staggered Pattern. Floor Boards Are Ship Lapped And Preundercoated For Protection From Elements.
  • THRESHOLD - Steel Galvanized Angle Flush To Rear
  • REAR DOOR - Overhead Roll-up Door
  • REAR FRAME - Galvannealed Steel -painted Imron White, Includes Built-in Header Design, Clearance Light Protector And Rain Deflector, Curbside And Roadside Grab-handles
  • ROOF - .032” One-piece Aluminum Sheet With Anti-snag Roof Bows On 24” Centers With Crowned Roof Design Which Prevents Water/Ice Pooling
  • SKINS - .040“ Aluminum, Pre-painted White
  • SIDE WALL - Extruded Aluminum Top And Bottom Rails With 1-3/8” Deep Galvanized Steel Z-shaped Vertical Posts Installed On 16” Centers
  • FRONT END - Aerodynamic Aluminum Radii and Morgan’s Patented Poly-tuff Corner Caps
  • BUMPER - 5” Structural Bumper With Pooched Surface And Closure Plate
  • INTERIOR LIGHTING - (1) Domelight With Indicator Switch Mounted In Cab Dash
  • EXTERIOR LIGHTING - Led Sealed Clearance Lights, Per Fmvss-108 Installed In Front Corner Caps, Side Top Rails And Five Across Rear Header.
  • MOUNTING - Full Mount-u Bolt
  • MUDFLAPS - Morgan 24" X 36" Black
Morgan Truck Body: LandscaperPRO

Landscapers, maintenance crews, contractors, material suppliers and tradesmen of all kinds know there's no room in the schedule to worry about durability or to work around the limits of your truck. Morgan's LandscaperPro dump truck body is engineered to provide superior strength regardless of the body size. Steel I-beam construction, heavy-duty 10-gauge steel flooring, steel rub-rails and LED lighting are just a few of the standard features that result in a body that's hard to beat!

Make work easier with our integrated double acting hydraulic cylinder scissor hoist, forklift-friendly side door access, unencumbered bed access, and underbody tool storage options to maximize bed space. When your work demands strength, durability, and versatility you can depend on, you know you can depend on Morgan!

Morgan Truck Body: Parcel Aluminum

In an era of E-Commerce and Final Mile deliveries, you need a parcel van that is durable and efficient enough to meet your needs. Our cutaway Aluminum, FRP, and Morganplate parcel vans are just what you need to get the job done! Aluminum, Morganplate or Fiberglass Reinforced Plywood wall construction ensures solid choices when it comes to the functional qualities you prefer – AND the image you want your Dry Freight, box, straight-truck or van to present! With a front cab access door that limits exposure to the elements (and traffic) and various lighting, scuff, and cargo control options, you'll be prepared for anything and everything!

Features Include:
  • A full width pooched-surface bumper with strategically positioned grab handles for easier and safer movement in and out of the cargo area
  • Your choice of a solid front bulkhead OR optional pass-through door for quick and easy access from the cab
  • .032 Aluminum roof skin with roof bows on 24" centers
  • 1 1/8" Laminated hardwood flooring
  • Galvannealed steel rear roll up door, painted Imron white, includes built-in header design, clearance light protector and rain deflector, curbside and roadside grab handles, and DOT underride
Morgan Truck Body: Prostake Stake Bed

Designed and built to exceed the needs of service providers – landscapers, contractors, maintenance crews, and suppliers – there’s no doubt that Morgan’s ProStake platform body will be the BEST tool for your trade. With stake bodies ranging from 9 to 26 feet in length, and widths of 96” to 102”, your choice of flatbed or rack configurations, and a wide range of optional and industry-specific features designed to make your job easier and more efficient – Morgan has what you need to get the job done right!

Morgan Truck Body: Dump Body
Morgan knows that landscapers, maintenance, and public utility crews have neither time nor patience to work around the limits of a truck. That's why our Contractor Dump Body is engineered and built to deliver superior strength, durability, versatility, AND dependability – every day. Morgan's Contractor Dump Body - nothing less than everything you expect!
PJ's: Landscape Dump

Landscape truck bodies from PJ’s Truck Bodies are built to hold up during heavy landscape use, but they can also be used for other lighter-duty commercial needs. We provide landscape trucks that are perfect for hauling lawn equipment and light-duty tractors, with plenty of options available to suit your specific needs.

These custom landscape truck bodies are an ideal replacement for heavy, bulky, hard-to-maneuver industrial landscape trailers. These bodies can also be fitted for a tow receiver when needing to tow a trailer.

PJ's: Platform Body

PJ’s Truck Bodies offers a wide variety of standard features, as well as various options to choose from as we build and develop your truck body. Our experienced sales staff will help customize a body that best suits your need — and your budget. From a flatbed dump truck to a gooseneck flatbed to a flatbed tow truck and everything in between, we build the entire truck based on your specific criteria. There is no better place to find a flatbed truck body than PJ’s Truck Bodies.

PJ's: Western

If you have a horse trailer, boat, RV, or other oversized loads, our western truck body makes towing worries a thing of the past!

We custom-build our western flatbed with a gooseneck hitch and a standard tow receiver to make it perfectly equipped for hauling loads of nearly any size. The body pictured is our standard western flatbed. However, like all our beds, PJ’s Truck Bodies will customize this body to suit your individual requirements.

    Standard Options:
  • 1/8” tread plate floor looks great, increases safety
  • Sunshade headboard with louvers, tapered to match cab of truck
  • 3” cross members, 12” on centers with 6” long sills
  • Rear skirting with incased lighting
  • 20”x20” floor compartment that will accommodate a chassis mounted gooseneck hitch ball
  • Receiver hitch – 10k rated
  • FMVSS lighting
PJ's: Stake Bed

PJ’s Truck Bodies offers a wide variety of standard features, as well as various options to choose from as we build and develop your truck body. Our experienced sales staff will help customize a body that best suits your need — and your budget. From a flatbed dump truck to a gooseneck flatbed to a flatbed tow truck and everything in between, we build the entire truck based on your specific criteria. There is no better place to find a flatbed truck body than PJ’s Truck Bodies.

PJ's: Chipper Truck

Anyone who’s ever hauled shredded tree debris for personal or commercial use knows that three things are of key importance in a chipper dump body: storage space, durability and convenience.

Fortunately, neither is a problem with a chipper body from PJ’s Truck Bodies. Our chipper truck beds are made to utilize maximum storage space both inside and outside, while keeping debris in their place on the job site and off the highway.

Choose from a variety of lengths, hitches, paint colors and more. No matter what your needs may be, we’ll build a chipper body to your exact specifications to last for years to come.

PJ's: Dovetail Landscape

PJ’s Truck Bodies offers a wide variety of standard features, as well as various options to choose from as we build and develop your truck body. Our experienced sales staff will help customize a body that best suits your need — and your budget. From a flatbed dump truck to a gooseneck flatbed to a flatbed tow truck and everything in between, we build the entire truck based on your specific criteria. There is no better place to find a flatbed truck body than PJ’s Truck Bodies.

PJ's: Dump Body
PJ’s Truck Bodies offers a wide variety of standard features, as well as various options to choose from as we build and develop your truck body. Our experienced sales staff will help customize a body that best suits your need — and your budget. From a flatbed dump truck to a gooseneck flatbed to a flatbed tow truck and everything in between, we build the entire truck based on your specific criteria. There is no better place to find a truck body than PJ’s Truck Bodies.
PJ's: Contractor Body
PJ’s Truck Bodies offers a wide variety of standard features, as well as various options to choose from as we build and develop your truck body. Our experienced sales staff will help customize a body that best suits your need — and your budget. From a flatbed dump truck to a gooseneck flatbed to a flatbed tow truck and everything in between, we build the entire truck based on your specific criteria. There is no better place to find a truck body than PJ’s Truck Bodies.
Reading: Classic II Aluminum

Reading’s Classic II™ aluminum service body combines the superior fuel economy and corrosion resistance of aluminum with Reading’s legendary quality and durability. Built with premium recycled aluminum alloy, the body is bathed in a zinc phosphate bath to prep it for improved adhesion of Reading’s durable powder coat finish, to resist corrosion better than any other service truck body on the market. It features all the standard and exclusive options that have made our flagship Classic II™ a leader in the truck body industry while offering environmental benefits that today’s consumers appreciate.

Standard features include a pressed diamond plate floor and inner tailgate surface, heavy-duty compartment doors and a rugged undercoated understructure for superior durability and strength. The Classic II™ aluminum service truck body also features Reading’s exclusive adjustable hidden hinges, Dual-Pro® door seals, a slam-action tailgate and much more. Add our industry-leading 10-year limited warranty and it’s easy to see why there’s No Body Better than the Classic II™.

Reading: Classic II Steel

There are many service bodies on the market, but there’s only one Classic II™. The Classic II™ steel service body, available for both single rear wheel and dual wheel chassis, is built with premium A60 coating-weight steel construction and our exclusive Triple Protection E-coat primer and powder coat finish to resist corrosion better than any other truck body on the market.

In addition, the Classic II™ offers features not found on any other service truck body. Our pressed diamond plate floor and inner tailgate surface provides superior strength and durability. Our patented hidden hinge system is fully adjustable and theft-resistant. Our exclusive Dual-Pro® seal system offers expanded door clearances and superior weather protection.

And that’s just the beginning. Add our industry-leading 6-year limited warranty and it’s easy to see why there’s No Body Better than the Classic II™.

Reading: Panel Service Body

The panel and tapered panel bodies offer interior work space with three or four full-length shelves on each side to provide carrying space for long-handled tools and equipment. In addition, they feature numerous exterior compartments with spring-loaded door holders on all vertical doors for ease of operation. Solid rear access doors lock securely with a two-point locking system.

Both the panel and tapered panel bodies are built on the Classic II™ service body and are available in heights of 50", 60" and 72". All models are available in fuel-saving aluminum or heavy-duty galvannealed steel. Panel and tapered panel bodies offer all the features you come to expect with a premium Reading truck body.

Reading: SL Service Body

Reading’s SL service bodies feature the premium materials and quality construction Reading is famous for at an exceptional value. The SL is available in 98" single rear wheel, 108" and 132" dual rear wheel configurations. Both are available in standard and low-profile designs. You can get even more storage space with the Reading Spacemaker® option.

Every SL service truck body moves through our exclusive E-coat primer and powder coat finish process for outstanding rust and corrosion resistance. In addition, the SL service body offers numerous standard features and options, including Dual-Pro® door seals, an Aluma-Fill fuel cup, stainless steel rotary locks, a slam-action tailgate and much more.

Made in America and backed by our 6-year warranty, the SL service body offers unbeatable value.



Reading: Aluminum CSV

Our high-capacity aluminum Classic Service Van offers an enclosed workspace for keeping everything safe and organized. Backed by an industry-leading 10-year warranty, the CSV is the mobile workspace of choice for telecom, plumbers, HVAC and utility contractors

When you’re searching for the best steel service vans, remember that we set the bar for durability, functionality and performance. Our Ready Van SL offers exceptional value and is backed by our industry-leading six-year warranty.

Reading: Marauder

Haul the maximum payload in the most affordable way while boosting fuel economy. A heavy-duty understructure, rugged steel floor and sidewall construction provide long-lasting durability for working in rugged jobsites.

    Features:
  • Two-piece HRA1011 steel floor plate is fully seam welded, and includes angled sidewalls to floor to eliminate “bridging” of material.
  • Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.
  • With an adjustable linkage, the forward tailgate release allows you to dump loads from a safer and more convenient location at the front of the body.
  • Heavy-duty steel hinges with grease fittings for lubricating.
  • The drop-down tailgate release is operated with a single, fast-acting lever.
Reading: Marauder SL

Whatever you need to haul, the Reading Marauder SL dump body can get the job done. The Marauder SL dump body was designed to provide the most economical means to maximize your payload and increase fuel efficiency. The heavy-duty understructure, rugged steel floor and sidewall construction and high-capacity hoist will give you a tough, durable and reliable dump body. It is available in 9’ and 11’ lengths.

    Features:
  • Two-piece HRA1011 steel floor plate is fully seam welded, and includes angled sidewalls to floor to eliminate “bridging” of material.
  • With an adjustable linkage, the forward tailgate release allows you to dump loads from a safer and more convenient location at the front of the body.
  • The drop-down tailgate release is operated with a single, fast-acting lever.
  • Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.
Reading: Steel Stake Bed

Versatile and tough, our steel stake body offers a large open platform and steel stake racks for secure hauling of equipment and materials. It features A60 coating-weight steel finished with our exclusive E-coat primer and powder coat system for a durable finish.

Reading offers a variety of rack sets including steel stakes, low-profile contractor sides and Redi Racks, which are ideal for hauling bulk materials and pallets. Quick-release latches allow fast removal of individual racks for easy loading and unloading of materials. An optional scissor hoist is available.

Reading’s steel stake body is available in lengths from 10' to 26' with a 96"-wide body.

Reading: Platform Body

Ideal for hauling bulk materials and pallets, it features a large, open platform built from steel for strength and long-lasting durability Quick release steel stake rack sets allow for easy loading and unloading.

When you need a platform truck for hauling compact and heavy equipment or materials, transporting pallets and bales of hay or other applications, choose the Heavy-Duty Platform Body. Versatile and tough, our Heavy-Duty Platform Bodies are built with premium hot-rolled steel, have a variety of flooring options and come with a durable powder-coat finish that endures the environment.

Reading: Redi-Dek

The Redi-Dek™ platform body replaces a standard pickup bed with a convenient platform that can be customized to meet your needs. It features reinforced outside stake pockets on 2” steel tie-down rails, a steel slotted bulkhead and a steel treadplate floor with reinforced rear apron. It can be fitted with optional contractor sides, an overhead material rack,or a gooseneck trailer hitch to accommodate a range of uses.

Featuring premium heavy-duty steel and Reading’s exclusive E-Coat primer and powder coat finish, Redi-Dek will give you years of performance in tough job conditions. It is available in 8.5’, 10’, 11' and 12’ body lengths for an easy upfit.

Reading: Master Mechanic HD Crane

The design is the result of over 40 years of custom body building experience coupled with valuable input from the end-user community and our loyal customer base. They include more standard features and benefits than our competitors standard production bodies — Feature Superior + Price Competitive = best overall VALUE available.

Designed and manufactured to withstand the harshest environments and most demanding field applications while providing the user with the highest quality, most user friendly, versatile, functional, and safe body available.

  • The Master Mechanic™ Series 20 Series crane bodies are built for up to a 4,000 lb. crane.
  • The Master Mechanic™ Series 25 Series crane bodies are built for up to a 5,000 lb. crane.
  • The Master Mechanic™ Series 45 Series crane bodes are built for up to a 7,500 lb. crane.
  • The Master Mechanic™ Series 78 Series crane bodes are built for up to a 12,000 lb. crane.
Reading: Landscaper SL

The premium A60 coating-weight steel makes it ideal for transporting loose, bulk or skidded material that's lighter in weight but still requires room. Constructed for long-lasting durability you can count on to work hard for you job after job. Available in 9' and 12' models.

Royal Truck Body: Service Body
  • Body Construction of A-60 Galvanized Steel Locks Out Rust and Corrosion
  • Single Doors on Front Compartment for Enhanced Resistance to Water and Dust
  • Weather Stripping for Dust and Water Resistant Compartment Interiors
  • Rain Gutters Above all Doors
  • Gas Springs on all Vertical Doors and Chain Stops on Horizontal Doors
  • All Compartment Doors are Double Paneled
  • Trademarked Recessed Stainless Steel Door Pockets with Internal Fasteners
  • Top Lids Have (2) Gas Shocks and (2) Rotary Latches Each Mounted on Lid Ends
  • Bright Tread Aluminum Diamond Plate Overlays on Top Lids
  • Bright Tread Aluminum Front Gravel Guards and Splash Guards
  • Lock-in-place Shelving, Adjustable on 2” Centers
  • 13.5” High Self-leveling Tailgate with Shear Resistant Machined Hinges and Protective Stainless Steel Cap
  • 12 Gauge Diamond Plate Floor on 10 Gauge Crossmembers
  • Composite Fender Flares
  • Zinc-plated Hinge Rods with Hinge Blocks
  • Lighting Package Installed on Bumper Kick-plate
  • 8” Rear Step Bumper
  • Removable Trays
  • Tie Downs in Bed Area
  • Fortress 5-Point Locking System with Zinc Plated Lock Rods
  • 1900 Emulsion Undercoating
Royal Truck Body: Contractor Body

Touting cargo space matched only by a flatbed, boxes above and below deck, portable trays in the flip-top compartments of the top boxes, and a heavy-duty over-cab ladder rack that is forklift loadable; the contractor body sets the bar high when it comes to versatility. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements. Fold-down gates make it easy to load the bed area without being inconvenienced with loose gates.

The ladder rack comes with Snap-Loc standard on the side rails and heavy-duty rope hooks on rack legs, while the top boxes have D-ring tie-downs on the rear, providing multiple tie-down points to secure loads in the bed and on the rack. With space to secure welders, compressors, generators, or lawn equipment with room to spare; the contractor body is perfect for any number of vocations.

Royal Truck Body: Platform Body

Standard Features

  • 42” High, 50/50 punched-steel headboard
  • 7” High-profile 10 GA. Side rails w/ Internal stake pockets
  • Recessed fuel Pocket
  • 4” 11 GA. Cross-members on 16” centers
  • Rope Hooks on Cross-members before & aft of rear wheels
  • Mud Flaps w/ Anti-sail brackets
  • Heavy-Duty Dock bumper
  • Powder-coated frame
Royal Truck Body: Landscape Dump
    Landscape Dump Body Standard Equipment
  • 42” high Solid Plywood Gates with Wood Uprights on Landscape Dump Body
  • Double-acting Hoist raises and lowers the Dump Bed
  • Steel Upright Posts and Framing on Rear Hinged Gates
  • Heavy Duty Drop Rod Lock on Rear Gates
  • Rear Hinged Gates allow easy access to bed area
  • Expanded Metal Cab Shield
  • Royal Mud flaps
Royal Truck Body: Service Combo Body

With a 3' Work platform in place of the rear compartment, the Royal combo service body transforms a regular service body into a mobile work station. With removable gates and a variety of options, this body is perfect for the craftsmen who need ample storage and workspace. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements while Ignition key coded, Fortress 5-point locking compartments and internal master lock as an option, provides unprecedented security.

Portable trays in top lids and ergonomic D-shaped handles are highlights of a body engineered with productivity and ease of use in mind. With a heavy-duty, forklift loadable over-cab ladder rack, bamboo slats with stainless-steel posts for the rear platform, and heavy-duty dock bumper as standard features; the Royal combo service body comes equipped to tackle just about any demands.

Royal Truck Body: RSV
    Standard Features:
  • A-60 galvannealed steel body construction locks out rust
  • Fortress 5-Point Locking System with zinc plated lock rods
  • Smooth body panels for company graphics
  • Rear Barn Doors
  • Rear access door to conduit compartment
  • Internal Master Lock System
  • Removable, high impact composite trays with dividers on inside shelves
  • Rain gutters above all doors
  • Automotive-style Neoprene weather stripping for dust and water resistant compartment interiors
  • Gas springs on all vertical doors and chain stops on horizontal doors
  • All compartment doors are double-paneled
  • Composite fender flares
  • Trademarked recessed stainless steel door pockets with internal fasteners
  • Tough Bright Tread aluminum front gravel guards and splash guards
  • Lock-in-place shelving, adjustable on 2” centers
  • 12 gauge diamond plate floor on 10 gauge crossmembers
  • Full width 11.75” rear step Grip Strut bumper
  • 1900 emulsion undercoating
  • Solid Bulkhead
  • Zinc-plated hinge rods with hinge blocks
  • 4 tie downs in bed area
  • 3-year / 36,000 mile limited warranty
Royal Truck Body: Stake Bed

The last things you need are surprises and expensive add-ons. You have no patience for nickel-and-diming, just like your customers. So Royal Truck Body gives you more standard features than any other service body builder. The kind of commonsense value that respects your hard work and tight margins.

The versatile Royal Stake Bed Body is tough and built with 11 gauge steel cross members on 16” centers for added strength. Easily lift and remove the individual Apitong® panels for loading and unloading. Apitong® has been the traditional wood of choice for flatbed truck flooring where product weight, durability, strength and value are the major concerns.

    Standard Stake Bed Features:
  • 42” High, 50/50 punched-steel headboard
  • 7” High-profile 10 GA. Side rails w/ Internal stake pockets
  • Recessed fuel Pocket
  • 4” 11 GA. Cross-members on 16” centers
  • Three self-tapping screws on wood at each cross member
  • Rope Hooks on Cross-members before & aft of rear wheels
  • Heavy-Duty dock bumper
  • Powder-coated frame
  • Apitong® hardwood tongue and groove floor
  • Under-bed rope hooks
  • 50/50 bulkhead with 14 gauge galvanealed perforated steel top section and solid steel bottom
  • Legal light package and reflectors
  • Frame construction is 2” x 3” steel tubing
  • Mud flaps with Anti-Sail Brackets
  • 42” high solid plywood gates with hardwood uprights and grab handles
  • 3 year/36,000 mile limited warranty
Royal Truck Body: Utility Crane Body
    Standard Features:
  • Body construction of A60 Gavaneeled steel
  • 12 GA diamond plate steel floor on 10 GA. Cross members
  • Polished aluminum diamond plate gravel & splash guards
  • Polished aluminum diamond plate overlay on closed top lids
  • Double paneled compartment doors
  • Rain gutters above all doors
  • Weather stripping on all compartment interiors
  • Fortress 5-point security hardware utilizing the one-key solution automotive lock package
  • Zinc-plated door lock rods
  • Trademarked rivet free stainless-steel door pockets with internal fasteners
  • Gas shocks on all vertical doors
  • Chain stops on horizontal doors
  • Lock in place, adjustable shelves in compartments on 2” centers
  • Integrated fender flares
  • Double paneled, self-supporting, self-leveling tail gate w/ locking paddle handle utilizing the one-key solution
  • Crane reinforcement for up to 2,000, 3,200 or 5,000 lbs. Capacity crane mounted on Rear Compartment Top
  • 8” recessed Royal step bumper
  • Legal LED light package recessed in bumper kick plate
  • 4 tie downs in bed area
  • Axalta brand Imron Elite Automotive Grade Paint 1900 emulsion undercoating

The CROWN Service Body, with features comparable to most other manufacturers but built with Scelzi craftsmanship and legendary attention to detail.

  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • All bodies equipped with a 6-inch step bumper, powder coated grey
  • Stainless steel tubing around wheel well openings
Scelzi: Signature

The Signature Series is our Premium line of truck bodies, with upgraded styling and construction materials.

  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • All bodies equipped with a 6-inch step bumper, powder coated gray
  • Stainless steel tubing around wheel well openings

Scelzi Contractor Flatbed Bodies are the perfect choice as work trucks for building work sites.

All Scelzi Contractor flatbed bodies share certain features and traits, including:

  • Standard body is painted white
  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • Super Contractor bodies have additional storage options
  • Stainless steel tubing around wheel well openings
  • Floor and side racks can be constructed of aluminum or wood
  • All Contractor bodies can be ordered with a standard or fork lift accessible material rack

Scelzi Contractor Flatbed Bodies are the perfect choice as work trucks for building work sites. The Super Contractor features an added top toolbox for extra storage.

All Scelzi Contractor flatbed bodies share certain features and traits, including:

  • Standard body is painted white
  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • Super Contractor bodies have additional storage options
  • Stainless steel tubing around wheel well openings
  • Floor and side racks can be constructed of aluminum or wood
  • All Contractor bodies can be ordered with a standard or fork lift accessible material rack
Scelzi: Front Range
All Scelzi Front Range Flatbed Bodies share certain features, including:
  • Standard body is powder coated black
  • Flooring and sides are 1/8-inch Diamond Plate steel
  • Integrated gooseneck hitch with 2-5/6" ball recessed in floor plus a side flip lid
  • Bolt-on tapered headboard
  • and much more
  • Flatbed Bodies manufactured by Scelzi are the best in the industry, and are offered in two main styles: Western and Scelzi flatbeds. We also manufacture several unique variations to our standard flatbeds, including the Cowboy, Cruiser and Front Range bodies.

    Western Style Flatbed - with a "squared" ICC Dock Bumper in back.

    Scelzi Style Flatbed - with an "angled" tail plate with California Dock Bumper in back.

      Standard Features on ALL our Flatbeds:
    • Standard body is painted white, but black is also an option. Custom colors available for an additional charge.
    • Three point latching system on all compartment doors
    • Gas shocks on open top compartments and vertical doors
    • Toolbox options include (a) Underbody tool box or (b) Top mounted tool box with OPEN top or CLOSED top

    Western style flatbed - with a "squared" ICC Dock Bumper in back. Standard flooring options are hardwood and steel (smooth).

    • Standard body is painted white, but black is also an option. Custom colors available for an additional charge.
    • Three point latching system on all compartment doors
    • Gas shocks on open top compartments and vertical doors
    • Toolbox options include (a) Underbody tool box or (b) Top mounted tool box with OPEN top or CLOSED top

    Scelzi Combo Bodies are a crossover between Service Bodies and Contractor Bodies, offering the most requested features of each body style.

    All Scelzi Service Combo Bodies share certain features and traits, including:

    • All Combo bodies are standard painted white with aluminum diamond plate on top
    • Three point latching system on all compartment doors
    • Gas shocks on open top compartments and vertical doors
    • Stainless steel tubing around wheel well openings
    • Side racks can be constructed of aluminum or wood
    Scelzi: SFB Stake Bed
      Standard Features on ALL our Flatbed Trucks:
    • Standard body is painted white, but black is also an option. Custom colors available for an additional charge.
    • Three point latching system on all compartment doors
    • Gas shocks on open top compartments and vertical doors
    • Toolbox options include (a) Underbody tool box or (b) Top mounted tool box with OPEN top or CLOSED top
      Side Racks
    • A.J. Baer style tapered polished stainless steel stakes with slats.
    • Available in 12", 15", 18", 24", 36", 42", 48" heights.
    • Other combinations of painted steel stakes or hardwood, steel or aluminum siding can be ordered.
    • Scelzi Flatbed Underbody Tool Boxes LONG HIGH DEEP 24" 18" 18" 30" 18" 18" 36" 18" 18" 40" * 18" 48" 18" 18" 60" 18" 18"
    Scelzi: Dump Body

    Scelzi Dump Truck Bodies are designed and manufactured with rugged durability for the toughest jobs. From the cross member supports to the welding techniques to the paint and finishing booth, a Scelzi Dump body is built to last for many years to come.

    All Scelzi Dump bodies share certain features and traits, including:

    • Standard body is painted white but black also available
    • Solid sides are standard (DBS) but fold-down sides (DBF) is an option on smaller dump bodies
    • gauge High-Tensile steel throughout body
    Scelzi: Welder Body

    Scelzi Welder Bodies are designed specifically with the needs of professional welders in mind.

    All Scelzi Welder bodies share certain features and traits, including:

    • Standard body is painted white
    • Three point latching system on all compartment doors
    • Gas shocks on open top compartments and vertical doors
    • Tapered front compartments and smooth steel flooring with 5" drop
    • Oxygen bottle holders in transverse compartment on driver side
    • Acetylene bottle holders, hose holders, hose reel with louver
    • Trailer plug and 7/4 way OEM socket
    • Class 5 receiver hitch without insert
    Scelzi: Water Truck

    All Scelzi Water Trucks share certain features and traits, including:

    • Standard body is painted white
    • Water tank skins are 3/16" steel
    • 24" x 24" square manhole at top of tank (no lid)
    • 4" x 3" Berkeley water pump (750 gpm)
    • Spicer PTO driveline
    • 4" x 4" water manifold
    • 3" standard air valves
    • Premium lighting package
    • and much more
    Scelzi: Landscape Dump

    Scelzi Landscaper Bodies are designed to assist with landscaping and agricultural jobs. They are constructed on a flatbed frame and have a hoist for dumping the contents of the bed.

      Standard Features:
    • Standard Body is Painted White
    • 10 Gauge Smooth Steel Floor
    • Cross Member on 16" Centers
    • Rope Hooks on Each Cross Member
    • Perforated 10 Gauge Headboard
    • Rear Barn Doors
    • Optional Side Barn Doors
    • 42" Solid Steel Side Racks Hinged to Fold Out at 21"
    • Racks in 5ft Sections - One in Front, One on Driver's Side, and One on Curbside
    • Class V Receiver Hitch
    • 7/4 Way RV Plug
    • Cargo Area Covered with Polyurea for Added Rust and Corrosion Protection
    Scelzi: Chipper Truck

    Scelzi Chipper Bodies are designed to assist with the removal of wood chips and other landscaping and forestry needs. They are constructed on a flatbed frame and have a hoist for dumping the contents of the bed

    All Scelzi Chipper Bodies are based on a Flatbed Dump body and share certain features and traits, including:
  • Standard body is painted white
  • FLOORING: 10 gauge High-Tensile steel
  • SIDES: 12 gauge sides with 2 rows corrugations
  • HOIST: Scelzi Premium quality hoist
  • REAR BARN DOORS: 48" high
  • HITCHES: A Class 4 Receiver Hitch along with 7/4 RV Plug
  • Premium LED light package
  • Scelzi: Western Crane Body
      All Scelzi Crane bodies share certain features and traits, including:
    • Three point latching system on all compartment doors
    • Gas shocks on open top compartments and vertical doors
    • Stainless steel tubing around wheel well openings
    • and much more
    Smyrna Truck: Aluminum Dry Freight
    • 1.125” Laminated Hardwood Floor
    • Threshold Flush to Rear With Drain Trough
    • .040” Prepainted Aluminum Sides
    • Galvanized Steel Z-Posts
    • Extruded Aluminum Corner Posts
    • Steel Rear Frame W/ Integral Rain Gutter
    • Aluminum Tread-Brite Front Radius
    • Cast Aluminum Corner Caps
    • Galvanized Anti-Snag Roof bows ON 24” Centers
    • .5” Plywood Liner on Front Wall
    • Cargo Dome Light
    • FMVSS 108 Exterior Lights & Reflectors
    • Full Asphaltic Undercoat
    Supreme: Iner-City

    Supreme sets the benchmark for cutaway truck bodies. Featuring a cab-access door, flat floor, and tight turning radius, our tough, sturdy Iner-City cutaway is ideal for shorter, multi-delivery routes, effortlessly carrying your cargo. Versatile and rugged, the Iner-City helps you get through the workday with dependable efficiency.

    Supreme: Spartan Cargo

    The Spartan Cargo is a cutaway that’s an excellent solution for multi-stop deliveries in cities and other tight places. The low-profile design and exceptional maneuverability make for a smooth ride. Practical and comfortable, with room to stand up straight inside, the Spartan Cargo is all business.

    Supreme: Spartan Service Utility Van

    Built to save time, the Spartan Service truck body delivers convenience. You’ll find compartments and custom shelving to keep you organized, and a large, bright work space that provides shelter from the elements while at the worksite. You can even work standing up inside, and the low-profile design allows easy access to your cargo and equipment.

    Supreme: Signature Van
    Durable and strong, Supreme’s Signature Van Body – available in a variety of sizes – can handle a range of payloads to help you get the job done, no matter what you’re hauling. From top to bottom, front to back, inside and out, everything you’ve demanded in a truck body is here – and then some.

    Supreme: Spartan Cargo CV

    The Spartan Cargo is a cutaway that’s an excellent solution for multi-stop deliveries in cities and other tight places. The low-profile design and exceptional maneuverability make for a smooth ride. Practical and comfortable, with room to stand up straight inside, the Spartan Cargo is all business.

    Switch-N-Go: Dump Truck

    Our Switch-N-Go ® dump body is available in seven standard lengths, from 8’ to 14’ long, as well as two build grades (standard & heavy duty). Dump bodies come manufactured with 2-way dump gates, with a variety of bulk heights (39”, 48”, or 51”) and capacities ranging from 2.2 up to 3.9 cubic yards. These open-topped dump bodies all come with our zinc prime & powder coated finish which is boosted by our triple stage wash to ensure proper curing and rust resistance. Options for our dump bodies include mesh tarp, contractor (fold-down) sides, coal chutes, extended board pockets, cab shields.

    With the Switch-N-Go® hoist system, your crew can work safely at ground-level by unloading the body to the ground. Easily use hand tools and wheelbarrows in a safe and comfortable position. Dropping a body to ground-level also allows you to load equipment like track loaders, motorized dumpers into your work truck body for easy transport, and material handling. Learn more about the advantages of a hoist system paired with a detachable truck body, and see how to supercharge your productivity and your business opportunities.

    Switch-N-Go: Drop Box

    Switch-N-Go® Drop Box is available in eight standard lengths, from 8’ to 15’ long, as well as two build grades (medium & heavy duty). Drop boxes come manufactured with either single swing gate or barn doors, with a variety of bulk heights Medium Duty (39”, or 51”) or Heavy Duty (36” or 48”) and capacities ranging from 7.2 up to 18 cubic yards based on models.

    With the Switch-N-Go® hoist system, your crew can work safely at ground-level by unloading the body to the ground. Easily use hand tools and wheelbarrows in a safe and comfortable position. Dropping a body to ground-level also allows you to load equipment like track loaders, motorized dumpers into your work truck body for easy transport, and material handling. Learn more about the advantages of a hoist system paired with a detachable truck body, and see how to supercharge your productivity and your business opportunities.

      Standard Features:
    • High quality powder coated finish up to 14'
    • Sloped front for easy clean out
    • Three build grades available
    • Standard 6" steel ground rollers
    • Custom options available
    • EZ-Slide™ Bullnose
    Unicell: Aerocell

    Save money in fuel costs with the Aerocell van body. Designed with 3D CAD software, the Aerocell continues and enhances the lines of the cutaway van, creating a sleek look that allows smooth, quiet air flow. The result is substantial fuel savings… up to 20% better than conventional truck bodies have been reported by customers. That can mean thousands of dollars saved over the life of your truck! And all Unicell bodies are backed by a five year limited warranty.

    Unicell: Classicube

    Traditionally styled for maximum cubic capacity, function, and all-around-town drivability, Unicell’s ClassiCube is the original in our line of one piece molded fiberglass truck bodies. Thousands of this model have gone to work all over North America.

    Unicell: Dry Freight

    The most practical body in today’s industry, the low-maintenance Unicell is easy to repair, beautifully shows off company graphics, and is built tough enough for heavy loads without increased weight. Handling GVWR’s up to 32,000#, these workhorses are spec’d with extra heavy duty features such as 3? structural steel crossmembers, wider rub rails, and front crash plates. Add these to the obvious aesthetic features of Unicell’s fiberglass bodies and you have a unique and good-looking, yet durable dry freight van. And all Unicell bodies are backed by a five year limited warranty.

    Utilimaster: Walk-In Van

    Utilimaster’s walk-in van is the industry-standard for delivery and service vehicles. Built on a purpose-built chassis ready to shoulder your load, the walk-in van has maximum versatility and interior design capabilities, with a highly modular cargo area and multiple side and rear door configurations. We customize every walk-in van to increase driver productivity and safety. Options include interior fold-up or fixed shelving, E-track systems, cargo load bars, work counters, bins, compartments, and more.

    ABI Fabrication (Avery Barron): Crane Service Body
      Product Features:
    • Built with industrial adhesives and mechanical fasteners
    • No welding
    • Corrosion resistant
    • Pre-painted before assembly
    • 1,600 lbs.
      Upgraded Features:
    • Integrated drop-down step in bumper
    • Receiver Hitch and Grab Handles
    • Heavy Duty Tie Down Rings
      Options:
    • 11' Body Option (84" CA)
    • Tall cabinet options on 9' and 11' bodies
    • 20" work bench bumper
    Air-Flo: Pro-Class
      Pro-Class Dump Body Features:
    • Horizontal Lines and Gussets Have Smooth Rounded Corners for a Classy Modern Appearance
    • Body Sides are Constructed of (2) Sheets of 10 ga Steel for Unsurpassed Strength and Durability
    • Double Wall Sides Form a Fully Boxed Top Rail and Include 45º Sloped, Dirt Shedding Subrails
    • The 94” Wide Body is Fully Welded and Made of 10 ga Steel Throughout
    • Exclusive Quick-Latch® Tailgate Latching System Makes Tailgate Operations Simple and Easy
    • The Body Understructure is Built with 3” Structural Steel Channels Spaced Every 12” and Supported by 5” Structural Channel Longitudinals
    • High Lift Capacity Scissor Hoist with Factory Installed Body Prop is Standard Equipment
    American Cargo by Midway: Liberty II
    Auto Crane: Titan

    Titan crane and service truck bodies live up to the Auto Crane reputation for durable productivity. Rely on the field-proven, patented Titan work truck body to take on the most punishing assignments.

    The innovative Titan is not only engineered to easily handle the most rugged off-road routes, but is also made for enhanced performance and functionality to help operators accomplish the mission more safely, quickly and efficiently. From body-stress reducing rounded corners to the integrated crane box, Titan crane bodies set the standard.

    Strength. Reliability. Durability. Titan service crane bodies — engineered for the way you work, for years to come.

    Bay Bridge: Classic
    • 1/2" FRP Solid Bulkhead
    • 12 Gauge Steel Flat Floor Frame
    • 12 Gauge Steel Hat Section Cross Members on 16? Centers
    • 10 Gauge Steel Floor Frame Rear Sill
    • Galvanized Roof Bows on 16" Centers
    • Insulated Ceiling w/ 3.4MM Luan Liner
    • 2"x6" Shiplap Dense Pine Floor
    • .032 Exterior Roof Aluminum
    • .043 Exterior White Sidewall Aluminum
    • 3/8" Plywood Sidewall Liner
    • Extruded .125 Aluminum 3" Radius Corner Posts
    • Extruded .125 Aluminum Roof Siderails
    • .130 Aluminum Protective Rubrail
    • Interior Dome Light with Switch
    • Composite Roll Up Door
    • Bottom Body Wrap
    • Steel ICC Dock Bumper w/ Running Lights & Reflectors
    • Rear Mud Flaps
    • Complete Body Undercoating
    Bay Bridge: FRP
    • 3 Year Warranty
    • 1/2" FRP Solid Bulkhead
    • 1/2" FRP Side Walls
    • 12 Gauge Steel Flat Floor Frame
    • 12 Gauge Steel Hat Section Cross Memebers on 16" Centers
    • 10 Gauge Steel Floor Frame Rear Sill
    • Galvanized Roof Bows on 16" Centers
    • 2"x6" Shiplap Dense Pine Floor
    • .032 Extrior Roof Aluminum
    • Extruded .125 Aluminum 3" Radius Corner Posts
    • Extruded .125 Aluminum Roof Siderails
    • .125 Aluminum Protective Rubrail
    • Interior Dome Light with Switch
    • Composite Roll Up Door
    • Bottom Body Wrap
    • Steel ICC Dock Bumper w/ Running Lights & Reflectors
    • Rear Mud Flaps
    • Complete Body Undercoating
    Bay Bridge: Sheet and Post
    • 3 Year Warranty
    • 1/2” FRP Solid Bulkhead Wall
    • 12 Gauge Steel Flat Floor Frame
    • 12 Gauge Steel Hat Section XMembers on 16” Centers
    • 10 Gauge Steel Floor Frame Rear Sill
    • 2"x6" Shiplap Dense Southern Yellow Pine Floor
    • 12 Gauge Steel Rear Door Structure
    • Galvanized Roof Bows on 16” Centers
    • .032 Exterior Roof Aluminum
    • Aluminum Sidewall Frame Construction
    • 1 1/2" Aluminum I-Beam Sidewall Studs On 16" Centers
    • .043 Buck Riveted Exterior Aluminum Sidewall
    • 3/8" Plywood Interior Sidewall Liner
    • Extruded .125 Aluminum 3" Radius Corner Posts
    • Extruded .125 Aluminum Roof Siderails
    • .130 Aluminum Protective Rubrail
    • Interior Dome Light with Switch
    • Composite Roll Up Door
    • Bottom Body Wrap
    • Steel ICC Dock Bumper w/ Running Lights & Reflectors
    • Rear Mud Flaps
    • Complete Body Undercoating
    Bay Bridge: Classic Box Truck
    Standard Features
    • 3 Year Warranty
    • 1/2" FRP Solid Bulkhead
    • 12 Gauge Steel Flat Floor Frame
    • 12 Gauge Steel Hat Section Cross Members on 16? Centers
    • 10 Gauge Steel Floor Frame Rear Sill
    • Galvanized Roof Bows on 16" Centers
    • Insulated Ceiling w/ 3.4MM Luan Liner
    • 2"x6" Shiplap Dense Pine Floor
    • .032 Exterior Roof Aluminum
    • .043 Exterior White Sidewall Aluminum
    • 3/8" Plywood Sidewall Liner
    • Extruded .125 Aluminum 3" Radius Corner Posts
    • Extruded .125 Aluminum Roof Siderails
    • .130 Aluminum Protective Rubrail
    • Interior Dome Light with Switch
    • Composite Roll Up Door
    • Bottom Body Wrap
    • Steel ICC Dock Bumper w/ Running Lights & Reflectors
    • Rear Mud Flaps
    • Complete Body Undercoating
    Bay Bridge: FRP Box Truck
    • 3 Year Warranty
    • 1/2" FRP Solid Bulkhead
    • 1/2" FRP Side Walls
    • 12 Gauge Steel Flat Floor Frame
    • 12 Gauge Steel Hat Section Cross Memebers on 16" Centers
    • 10 Gauge Steel Floor Frame Rear Sill
    • Galvanized Roof Bows on 16" Centers
    • 2"x6" Shiplap Dense Pine Floor
    • .032 Extrior Roof Aluminum
    • Extruded .125 Aluminum 3" Radius Corner Posts
    • Extruded .125 Aluminum Roof Siderails
    • .125 Aluminum Protective Rubrail
    • Interior Dome Light with Switch
    • Composite Roll Up Door
    • Bottom Body Wrap
    • Steel ICC Dock Bumper w/ Running Lights & Reflectors
    • Rear Mud Flaps
    • Complete Body Undercoating
    Bay Bridge: Sheet and Post Box Truck
    • 3 Year Warranty
    • 1/2” FRP Solid Bulkhead Wall
    • 12 Gauge Steel Flat Floor Frame
    • 12 Gauge Steel Hat Section XMembers on 16” Centers
    • 10 Gauge Steel Floor Frame Rear Sill
    • 2"x6" Shiplap Dense Southern Yellow Pine Floor
    • 12 Gauge Steel Rear Door Structure
    • Galvanized Roof Bows on 16” Centers
    • .032 Exterior Roof Aluminum
    • Aluminum Sidewall Frame Construction
    • 1 1/2" Aluminum I-Beam Sidewall Studs On 16" Centers
    • .043 Buck Riveted Exterior Aluminum Sidewall
    • 3/8" Plywood Interior Sidewall Liner
    • Extruded .125 Aluminum 3" Radius Corner Posts
    • Extruded .125 Aluminum Roof Siderails
    • .130 Aluminum Protective Rubrail
    • Interior Dome Light with Switch
    • Composite Roll Up Door
    • Bottom Body Wrap
    • Steel ICC Dock Bumper w/ Running Lights & Reflectors
    • Rear Mud Flaps
    • Complete Body Undercoating
    F. Barkow: Default

    The F. Barkow Inc. commitment to quality and workmanship began in 1879 and continues today. Handcrafted welding is done by skilled craftsmen to build the highest-quality glass racks on the market today.

    Barkow glass carriers are mounted approximately 18? from the ground which makes it easier to load and unload stone. This increases productivity while reducing breakage and employee injuries.

    Glass Carrier Specifications

    • All-Welded Construction
    • Driver and/or Passenger Side Exterior Glass Carriers, 86? Useable Height Most Common
    • 6 STAKE-LOC® Self-Locking Stakes with BARKLEATS™ and Hardware 1½” Square Tubular Construction
    • “B” Horizontal Loadholding Slats with “B” Slot at Front and Rear of Rack Barpads® Glass Cushions on 8? Centers
    • Neoprene Baseplate Pads on 12? Centers with 5? Useable Ledgeboards Front Load Stops
    • Double Row of Stake Slots on 12? Centers
    • 24? Lower Splash Panel to Protect Glass from Road Debris
    • 700 Series Pickup Box Stabilizer
    • Safety Feature Cut-Outs for Rear Lights on 9' Long Glass Carriers
    • All Necessary Lights and Reflectors

    Options Available:

    • Upper Sign Panels
    • Removable Wheelhouse Pan Covers
    • Cantilevered or Goal Post Metal Carrier
    • Next Ledge Removable Upper Ledgeboards
    • 30? Manual Extension (Aluminum)
    • 30? Gear and Rack Extension (High Tensile Steel or Stainless Steel)

    Glass Carriers for Pickups are available in the following materials:

    • Aluminum – Polished Finish
    • Stainless Steel – Lighter and stronger than steel. It is three times stronger than aluminum and requires minimum maintenance. Polished Finish.
    • High Tensile Steel – Primed and finish painted in bright white or the color of your choice at an additional charge.

    Bedrock: Diamond Series
    • Glossy polyester finish with industry-leading adhesion & longevity
    • Corrosion & UV resistant
    • Impact & salt-spray tested for best performance
    • Integrated 2'' receiver hitch rated at 18,000 lbs.
    • B&W 2 5/16'' welded ball rated at 30,000 lbs.
    • Fully articulating lid can be removed
    • Spring-loaded safety chain anchors reduce vibration & noise
    • 7-way & 4-way trailer wiring plug
    • Accommodates additional trailer plug
    • Rack Available in rounded or hauler style designed for optimal proBack-up lights in headache rack can double as working lights
    • Patented adjustable headache rack provides the perfect fit for your truck
    • Cutout allows for cargo lights and camera to meet DOT requirements
    • Lifetime LED lights that offer longevity & great visibility
    • DOT approved
    • Bed is pre-wired with sealed wiring harnesses to protect from moisture & prevent damage
    Bedrock: Granite Plus
      Standard Features
    • Full steel frame with 4'' & 3'' structural C-channel construction & 1/8'' steel diamond plate deck
    • Tapered corners allow for better turn radius when towing
    • Available for single & dual rear wheels
    • Corrosion & UV Resistant
    • Glossy polyester finish with industry-leading adhesion & longevity
    • Impact & salt-spray tested for best performance
    • Application process developed specifically for BEDROCK - our entire line of products are shot blasted to raw, white metal before powder coating for maximum adhesion
    • Lifetime LED lights that offer longevity & great visibility
    • DOT-approved
    • Back-up lights in headache rack can double as working lights
    • 7-way & 4-way trailer wiring plug
    • Trailer wiring plug recessed next to license plate
    • Bed is pre-wired with sealed wiring harnesses to protect from moisture & prevent damage
    • Integrated 2'' receiver hitch rated at 18,000 lbs.
    • Uprights designed to enclose receiver hitch for greater safety
    • * Maintains OEM Receiver Hitch for Ford 2017-current and Ram 2019-current
    • Patented adjustable headache rack provides the perfect fit for your truck
    • Window-cut design provides optimal visibility
    • Cutout allows for cargo lights and camera to meet DOT requirements
    • B&W 2 5/16'' welded ball rated at 30,000 lbs.
    • Fully articulating lid can be removed
    • Accommodates additional trailer plug
    • Spring-loaded safety chain anchors reduce vibration & noise

    Extreme conditions demand cutting edge innovation. The durable, fully featured BOSS DXT is the ultimate tool to fight all things snow and ice. The DXT combines both trip-edge and full moldboard trip technologies for high and low trip protection when striking obstacles like frozen snowbanks, manhole covers and curbs. Flared wings with enhanced curl throw snow with maximum efficiency and the DXT's multi-position plow blade can quickly and easily switch positions to move large amounts of snow.

    1. Patented Dual-Trip Design combines trip-edge and full moldboard trip technologies enhancing plow protection when striking hidden obstacles no matter your plow's position.
    2. SmartLight 3uses DOT- compliant 100% LED lights and Ice Shield Technology to prevent snow and ice build-up.
    3. 1/2" x 6" Long-Lasting, Durable Base Angle to provide extended wear resistance and comes with built-in curb guards and patented snow catcher.
    4. NEW! D-Force Keep your blade in contact with the pavement with optional D-Force.

    Quickly and easily expanding from 8 to 10 feet at the touch of a button, the BOSS EXT is equipped to clean up parking lots and wide open spaces. A true 10' width combined with pitched-forward wings let the EXT take wider passes carrying and moving more snow more efficiently. At 30 inches high with some versatile and flexible addition to your fleet. Another powerful tool in your plowing arsenal that's built to BACK YOU UP.

    1. Expandable, Fully Hydraulic, Pitched-Forward Wings expand from 8' to 10' to cover more ground.
    2. SmartLight 3 LED Headlight System uses DOT-compliant 100% LED lights and Ice Shield Technology to prevent snow and ice build-up.
    3. Designed for 3/4 ton & 1 ton trucks.
    4. Heavy-Duty Push Frame and Push Frame Attachment Bar provide additional strength and reliability.
    BOSS: HD PLUS

    If you're looking for larger, municipal-grade plows, BOSS has what you want! The newly designed HD+ has increased blade curl to minimize snow blowing over the blade and increase visibility when windrowing. Designed for medium-duty trucks, the BOSS Heavy-Duty Straight-Blades feature a reinforced moldboard with enhanced blade curl to power through deep, wet snow. They come standard with the SL3 light system with Ice Shield Technology to handle every job, even in the worst conditions. Because when it's on you to RESTORE ORDER, BOSS is always there to BACK YOU UP.

    1. New Enhanced Blade Curl to decrease snow blowing over the blade and to increase visibility.
    2. Heavy-Duty Push Frame and Attachment Bar for strength and durability to take on winter’s worst.
    3. Full Moldboard Trip Design helps to prevent plow damage when an obstacle is encountered.
    4. SmartLight 3 LED Headlight System uses DOT-compliant 100% LED lights and Ice Shield Technology to prevent snow and ice build-up.
    BOSS: Heavy-Duty Plows

    If you're looking for larger, municipal-grade plows, BOSS has what you want. Designed for medium-duty trucks, the BOSS Heavy-Duty Straight-Blades feature a reinforced moldboard with enhanced blade curl to power through deep, wet snow. They come standard with the SL3 light system with Ice Shield Technology to handle every job, even in the worst conditions. Because when it's on you to RESTORE ORDER, BOSS is always there to BACK YOU UP.

    1. Full Moldboard Trip Design helps to prevent plow damage when an obstacle is encountered.
    2. SmartLight 3 LED Headlight System uses DOT-compliant 100% LED lights and Ice Shield Technology to prevent snow and ice build-up.
    3. Cast-Iron Plow Shoes extend the life of the cutting edge.
    4. Heavy-Duty Push Frame and Quadrant for additional strength and durability.

    The HTX plow RESTORES ORDER with the same features and power of BOSS full-size straight-blade plows, built specifically for half-ton trucks. With business owners and homeowners in mind, the HTX line offers a strong, durable push frame and quadrant to clean up driveways and small business parking lots with a light-duty vehicle. When you need to RESTORE ORDER with your lighter-duty truck, BOSS is always there to BACK YOU UP.

    1. Variety of Blade Materials choose from mild steel, stainless steel or poly.
    2. Reinforced Moldboard Diagonal cross-bracing and formed bottom channel increase blade rigidity.
    3. Full Moldboard Trip Design The entire blade trips forward when obstacles are encountered to protect the truck and plow from damage.

    The HTX V-plow brings all the power and innovation of BOSS V-plows to your light-duty truck. With today's contractor and homeowner in mind, BOSS has engineered the HTX V-plow for today's lighter-duty and half-ton trucks by putting just the right amount of steel in exactly the right place for the best combination of strength and weight. The precisely crafted, ultra-efficient HTX V-plow is built to handle the biggest of jobs. Because when you need to RESTORE ORDER with your lighter-duty truck, BOSS is always there to BACK YOU UP.

    1. Built for Half-Ton and Light-Duty Trucks with all the power and innovation of BOSS V-plows.
    2. Full Moldboard Trip Design helps to prevent plow damage when an obstacle is encountered.
    3. Enclosed Hydraulics protects against corrosion and hydraulic freeze-up.
    4. SmartLight 3 uses 100% LED lights with an 8-10 year life expectancy and Ice Shield Technology to prevent snow and ice build-up.
    BOSS: Super-Duty Plows

    BOSS Standard- and Super-Duty straight-blade plows RESTORE ORDER with unsurpassed reliability and strength. Baked-on, powder coat paint finishes with zinc primer resists corrosion. Heavy-duty push frames and push frame attachment bars, optimize blade curl and are standard on every BOSS straight-blade. And for added strength to take-on nature's worst, BOSS Super-Duty straight-blades boast reinforced moldboard for increased blade rigidity and increased durability.

    1. Full Moldboard Trip Design helps to prevent plow damage when an obstacle is encountered.
    2. SmartLight 3 LED Headlight System uses DOT-compliant 100% LED lights and Ice Shield Technology to prevent snow and ice build-up.
    3. Cast-Iron Plow Shoes extend the life of the cutting edge.
    4. Blade Shock Absorber stabilizes and cushions the trip action.
    BOSS: Trip-Edge Plows

    BOSS Trip-Edge snowplows are engineered to power through the heaviest snow and any obstacles that come with it. The extra-rigid moldboard and trip-edge technology ensure that only the cutting edge trips when you hit an obstacle, so you won't lose the load you're pushing. Trip-Edge snowplows feature our adjustable trip return springs, so you can customize the trip spring tension for the job at hand. Available in steel and stainless steel for pickup truck applications, BOSS Trip-Edge snowplows are built to BACK YOU UP.

    1. Trip-Edge Design Base angle or cutting edge trips back to protect the plow and truck from damage when obstacles are encountered.
    2. SmartLight 3 LED Headlight System uses DOT-compliant 100% LED lights and Ice Shield Technology to prevent snow and ice build- up.
    3. Adjustable Trip Springs allow customization of the trip spring tension.
    4. Cast-Iron Plow Shoes extends the life of the cutting edge.
    BrandFX: Everlast Line Body

    Truck bodies built by BrandFX, including our premium line of EverLast™ Line Bodies, combine strength, performance and ample storage space, all packaged together in a lightweight composite body that weights up to 50% less than conventional steel bodies.

    This lower weight load improves fuel efficiency for service fleets, while lessening the stress forced on tires, brakes and suspension systems—reducing the costs of routine maintenance and adding more to long-term savings. When compared to Aluminum or traditional Steel Bodies, BrandFX offers its fleet and contractor customers a lower true Cost of Ownership.

    Buyers: SnowDogg Snowplow

    SnowDoggs are the ideal snow plows for pickups like the Ford® F-150 and F-250, Chevy® Silverado 1500 and 2500, and RAM® 1500 and 2500. With heavy duty frames and standard 304 stainless steel blades, your SnowDogg is the only heavy duty snow plow your truck will ever need. From sidewalks to driveways and small parking lots to massive campuses, there's a SnowDogg for every application.

    SnowDogg V-Blades

    The VXFII and VMDII are perfect for contractors that tackle a variety of job sites. The ability to switch from straight blade mode to V or Scoop at the push of a button helps bust through dense snow and navigate tight spaces, and the powerful double-acting angle cylinders backdrag with ease. A trip edge design lets you confidently plow over gravel and uneven terrain without fear of losing the snow in front of your plow to unseen obstacles. These heavy duty Doggs are designed for 3/4 ton+ pickups.

    SnowDogg Straight Blades

    There's a straight blade SnowDogg snow plow for pickup trucks of all sizes. The MDII is the best snow plow for half-ton pickups like the Ford F-150, Silverado 1500, and RAM 1500 as well as Jeeps and SUVs. It features the same rugged design and robust features as the larger plows. This makes it an amazing plow for driveways but also powerful enough to tackle commercial work. Many contractors send the MDII in after their larger trucks to clean up narrow alleys and other hard-to-access areas. Residential users and contractors alike love the RapidLink™ Attachment System. They can get their plow on and off their truck in under a minute, letting them quickly plow their driveway and get on with their day.

    The HDII, EXII, TEII, XP, and CM are snow plows for larger trucks like the Ford F-250 and F-350+, Silverado 2500 and 3500+, and RAM 2500 and 3500+. Features like the Floating A-frame™ help the plows bite the pavement for a clean scrape, and the municipal style chain lift provides the strength needed to stack large amounts of heavy, wet snow. These plows are great for everything from small parking lots to massive campuses, and they all use the same vehicle mount for maximum fleet compatibility.

    Cadet Truck Bodies: Bronco

    Our two Bronco models may differ in weight, but both are heavy-duty beasts of burden that will lighten your load and increase your productivity.

    Each model comes with a weatherproof wiring harness, all-weather undercoating, side pockets and rub rails, and a 12-gauge tread plate floor.

    Carrier: Direct-Drive

    Vehicle-powered refrigeration units provide cooling capabilities for small van applications and offer an economical alternative for straight truck bodies up to 20 feet long. These refrigeration units are perfect for delivery vans, cargo trucks, and more.

    CM Truck Beds: PL Model

    The PL model is a platform body with an edge, featuring the strongest, most durable materials on the market with best-in-class features to get the job done.

      Specs & Features
    • Lengths: 12', 14', 16', 18'
    • Headache Rack: Formed Bulkhead with Punched Grill
    • Deck: 3/8" Treadplate
    • Frame Rails: 4" Structural Channel Steel
    • Crossmembers: 3" Channel Steel 18" OC
    • BP Hitch: ICC Optional
    • Side Rails: 3/8” x 2” Side Rails with Stake Pockets
    • Marker Lighting: Bullet DOT Approved LED
    • Toolbox: Optional Underbody
    CM Truck Beds: RD Model

    Built to work. Built to Last.

    Tough enough to haul the big loads, the popular RD models are expertly designed, professional-grade workhorses that are sized to fit almost any unit.

    • Lengths 84", 8'6", 9'4", 11'4"
    • Headache Rack Steel Tube
    • Deck 1/8" Treadplate
    • Frame Rails 4" Structural Channel Steel
    • Crossmembers 3" x 3/16" Channel
    • Rear Skirt Solid One Piece with Tapered Corners
    • GN Hitch 30K B&W Hitch with Welded Ball
    • BP Hitch 18,500 lb. B&W Hitch with Receiver Tube
    • Side Rails 3/8” x 2” Side Rails with Stake Pockets
    • Fuel Fill Angled
    • 12V Trailer Plug 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
    • Rear Lighting Clear LED Oval
    • Light Box (Read Skirt) Steel
    • Marker Lighting Bullet DOT Approved LED
    • Toolbox Optional Underbody
    • Toolbox Handle N/A
    • Fenders N/A
    • Side Steps N/A
    • Tiedowns N/A
    CM Truck Beds: SK Model
      Specs & Features:
    • Lengths: 84", 8'6", 9'4", 11'4"
    • Headache Rack: Steel Tube
    • Deck: 1/8" Treadplate
    • Frame Rails: 4" Structural Channel Steel
    • Crossmembers: 3" x 3/16" Channel
    • Rear Skirt: Solid One Piece with Tapered Corners
    • GN Hitch: 30K B&W Hitch with Welded Ball
    • BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
    • Side Rails: 3/8” x 2” Side Rails with Stake Pockets
    • Fuel Fill: Angled
    • 12V Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
    • Rear Lighting: Clear LED Oval
    • Light Box (Rear Skirt): Steel
    • Marker Lighting: Bullet DOT Approved LED
    • Toolbox: (4) Standard Integrated
    • Toolbox Handle: T Handle Compression
    • Fenders: Steel Radius
    • Sidesteps: In front of and behind fender
    CM Truck Beds: TM Deluxe

    The TM Deluxe is designed to haul trailers from bumper or gooseneck positions and features a full-length rear skirt and side skirts with stainless fenders, providing a sleek and finished look. Enjoy loads of convenient storage thanks to this hardworking body’s 6 lockable toolboxes, all featuring our best-in-class T-handle compression latches.

    Specs & Features:

    • Lengths: 84", 8'6", 9'4", 11'4"
    • Headache Rack: Steel Tube
    • Deck: 1/8" Treadplate
    • Frame Rails: 4" Structural Channel Steel
    • Crossmembers: 3" x 3/16" Channel
    • Rear Skirt: Solid One Piece with Rear Step
    • GN Hitch: 30K B&W Hitch with Welded Ball
    • BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
    • Fuel Fill: Angled
    • 12V Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
    • Rear Lighting: Clear LED Oval
    • Light Box (Rear Skirt): Steel
    • Marker Lighting: Bullet DOT Approved LED
    • Toolbox: Utility Box in front; Top-Open ½ Length Shovel Box; Tall Chain Box in rear; Opossum Belly
    • Toolbox Handle: Chrome T Handle Compression
    • Fenders: Steel Radius
    • Sidesteps: In front of and behind fender
    • Tiedowns: (4) 18" Airline Track Tiedowns, (4) Attachment Rings

    CM Truck Beds: SB Model

    CM’s welded aluminum service body maximizes payload and resists the corrosion that most commercial customers want to prevent in their work trucks. Our wide variety of options allows our fleet and commercial customers to have a body that fits their needs.

    CM Truck Beds: ER Model
      Specs & Features:
    • Lengths: 84", 8’6", 9’4", 11’4"
    • Headache Rack: Steel Tube
    • Deck: 1/8" Smooth Steel
    • Frame Rails: 4" Structural Channel Steel
    • Crossmembers: 3" Structural 3/16"
    • Rear Skirt: Solid One Piece with Rear Step
    • GN Hitch: 30K B&W Hitch with Welded Ball
    • BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
    • Side Rails: Raised Side Rail with Aluminum Cap
    • Fuel Fill: Angled (Cast Aluminum)
    • 12V Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
    • Rear Lighting: Clear LED Oval with Chrome Housing
    • Light Box (Rear Skirt): Cast Aluminum
    • Marker Lighting: Bullet DOT Approved LED
    • Toolbox: (4) Standard Integrated
    • Toolbox Handle: Chrome T Handle Compression
    • Fenders: Stainless Radius
    • Sidesteps: In front of and behind fender
    • Tiedowns: (4) 18" Airline Track Tiedowns, (4) Attachment Rings
    CM Truck Beds: TM Model
      Specs & Features
    • Lengths: 84", 8'6", 9'4", 11'4"
    • Headache Rack: Steel Tube
    • Deck: 1/8" Treadplate
    • Frame Rails: 4" Structural Channel Steel
    • Crossmembers: 3" x 3/16" Channel
    • Rear Skirt: Solid One Piece with Rear Step
    • GN Hitch: 30K B&W Hitch with Welded Ball
    • BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
    • Fuel Fill: Angled
    • Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
    • Rear Lightning: Clear LED Oval
    • Light Box (Rear Skirt): Steel
    • Marker Lighting: Bullet DOT Approved LED
    • Toolbox: Utility Box in Front, Top-Open 3/4 Length Shovel Box; Low-Profile Chain Box in rear
    • Toolbox Handle: Chrome T Handle Compression
    • Fenders: Steel Radius
    • Sidesteps: In front of and behind fender
    • Tiedowns: (4) 18" Airline Track Tiedowns, (4) Attachment Rings
    Commercial Truck & Van Equipment: Gooseneck

    Standard Features:

    • 3" Structural Steel Cross Members on 16" Centers
    • 4" Structural Steel Channel Long Sills
    • 1/4" x 2" Banding Rail
    • 11 gauge Treadplate Floor
    • Full Depth Rear Tapered Apron
    • Heavy Duty One Piece Tapered Bulkhead
    • Stake Pockets
    • Stop, Tail, Turn and Backup LED Lights Mounted in Apron and Bulkhead
    • FMVSS Compliant Clearance Lights and Reflectors
    • High Gloss Black Acrylic Topcoat Prevents Corrosion
    Crysteel: E-Tipper

    The evolutionary E-Tipper gives you all of the most desired features in a dump body - strength, value and style.

    From the sculpted front and rear pillars to the one-piece seamless sides, to the western crossmemberless understructure, the E-Tipper combines good looks and durability with superior design.

    Features can be added to create the most versatile body for your needs without custom leadtimes. Body options and accessories add function, are extremely economical and easy to order.

    Every E-Tipper body is backed by Crysteel’s 5-year warranty.

    Custom Truck Body & Equipment: Stake Bed

    At Custom Truck Body & Equipment we can fabricate any truck body or work truck accessories to your specifications.

    We specialize in custom truck body fabrication, custom built parts and equipment, collision repair on work trucks and trailers

    Custom Truck Body & Equipment: Landscape Dump

    At Custom Truck Body & Equipment we can fabricate any truck body or work truck accessories to your specifications.

    We specialize in custom truck body fabrication, custom built parts and equipment, collision repair on work trucks and trailers.

    We are located in Santee, California. Contact us for a quote today!

    Dejana Truck & Utility Equipment: DuraCube

    Designed for cutaway applications and are available for both Single Rear Wheel (SRW) and Dual Rear Wheel (DRW) chassis. SRW body styles are available in 10’ & 12’ lengths and DRW body styles are available in 10’, 12’, 14’, 15’, 16’ and 17’ lengths. There are three models of body heights to choose from with inside heights of 72”, 78” and 84”.

    Dejana Truck & Utility Equipment: DuraBox

    DuraBox Cargo Van is available as either aluminum sheet and post (up to 26’) or FRP (up to 24’). The aluminum design features .040” pre-painted aluminum sheet with galvanized “Z” posts on 16” centers, 2” spacing on seams, and 4” on ribs. Fiberglass Reinforced Plywood (FRP) sidewalls are also available that provide a smooth, clean exterior look that’s great for graphics.

    The DuraBox Cargo Van come standard with a 10” aluminum diamond plate radius to protect the front edge from damage and heavy-duty extruded aluminum corners. Rear posts are manufactured with 4” x 5” heavy duty steel that is specifically designed to accommodate tailgate and liftgate installation.

      Features:
    • 3” I-Beam crossmember construction, spaced 16”
    • 4” I-Beam or channel longsills
    • 12 ga galvanneal rear frame construction
    • 4” rear post width
    • Complete underbody undercoat
    • Grab handles passenger and driver side
    • 5 5/8” rear header depth
    • Marker light eyebrow
    • Premium Grade door with 2? nylon rollers
    • 10” aluminum diamond plate front radius
    • 5” radius aluminum corner castings
    • One piece aluminum roof panels
    • Anti-snag roof bows on 24? centers
    • 1/2” AC plywood front wall
    • ICC Bumper (Standard)
    • Exterior lights meet FMVSS
    • Dome light with switch in body
    Dejana Truck & Utility Equipment: DuraCube Max

    Every aspect of the DuraCube Max Cargo Van was designed for heavy duty contractor use and convenience. To start, the door handles were designed by the fire/rescue service to withstand abuse… as well as a gloved hand. The heavy duty door hinges are mounted with stainless steel fasteners and have Zerk grease fittings. The double wall doors have dual contact seals to prevent leakage and heavy duty chains so doors can be dropped halfway down to create a work surface, or all the way to have easy access to the cabinet.

    The entire body was lowered to make it easy to access both the contents of the cabinets, as well as the rear. Inside there is a spacious 49” wide body-length floorspace, wide enough to haul sheetrock and plywood. There are also optional heavy duty body-length shelving on height adjustable unistrut tracks for storage.

    Choose from a DuraCube Max Cargo Van for cutaway applications or a DuraBox Max for cab/chassis applications.

      Standard Features Include:
    • 70/30 split rear doors with 50? opening width.
    • Galvanized, anti-snag roof bows on 16” centers.
    • Heavy-duty door frames and chains.
    • 180 degree drop down for easy access.
    • (2) Shelves in each vertical compartment & 1 adjustable divider shelf in each driver’s side horizontal compartment.
    • Sliding cab access door (cutaway only)
    • 49” W usable interior floor space
    • Aerodynamic radius top & sides
    • Interlaced cross-members on understructure for maximum rigidity and low floor height
    • Aluminum roof (translucent available)
    • 1/2” FRP one piece front wall w/ 6.5“ cab setback
    • 3/8” FRP one piece side wall construction, fully skirted to bottom of cab
    • Heavy-duty, 75 mil, rubber diamond tread floor mat
    • Heavy-duty door handles and hinges with stainless steel fasteners.
    • Natural aluminum door frames
    • Dual contact point door seals (on door & frame) for optimal sealing capability.
    Dejana Truck & Utility Equipment: DynaPro Dump Body

    Designed and tested for superior strength & performance! Also available with Fold-Down Sides.

  • ASTM A572 GR50 Alloy Steel for Superior Strength and Corrosion Resistance
  • Black Semi-gloss Powdercoat
  • Gravelometer chip resistance test
  • Direct and reverse impact test
  • Salt spray/ corrosion resistance test
  • Cross-memberless Understructure with Enclosed 7-ga. Trapezoidal Longsills
  • Fully welded to unify body structure and provide superior strength
  • Sleek, design with no salt pockets
  • Tubular Sidewall Construction
  • 10 ga. inner & 12ga. outer wall interlaced with floor and underbody for superior strength & rigidity
  • Scissor Lift & Sub-Frame
  • Double acting heavy-duty hoist
  • Redesigned subframe to eliminate welded joints
  • Mounting brackets: sub-frame to chassis
  • Rear Hinge
  • .250? plates with .375? doublers on outside of clevis
  • 1? OD zinc plated pin with cotter pin
  • Slide Lock Upper Tailgate Latch
  • 2-point latching system with ergonomic design to maximize leverage and Improve serviceability
  • Built-in tarp bar retention hooks
  • New Ergonomic Hand-held Controller
  • DownEaster: Dump Bodies Class 3-6
    • 10 gauge construction throughout
    • Dirt shedding , sloped design at side plate and tailgate top
    • Double panel side plates equal over 1/4" thickness.
    • Full depth 3/16"rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
    • All lighting is LED rubber mounted and NTEA and Federal compliant.
    • 2 1/2" shorter deck height (9' only)
    • Mounting height of 9.5" chassis to floor (9' only)
    • 10" board extension pockets ease of install & future optional / custom overhang.
    • Self aligning rear latch release for the top gate pins
    • Integrated tarp hooks
    • DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
    DownEaster: Swaphogg
    • Low profile sub frame and mounting height
    • 6" bore x 15" stroke hoist, standard
    • 50 deg. Dump angle (10 ton)
    • 6" x 2" structural tube frame.
    • Auto locking body latch w/ ergonomic pull handle
    • Warn 15K electric industrial winch w/ tensioner
    • Polyurethane side & rear rollers pressed over DOM steel, w/ greaseable / replaceable 1045 shafts
    • Nylatron WP guide rails (replaceable)
    • Exterior mounted body prop
    • Stainless steel pump cover
    • Spacer plates between upper & lower frames
    • "Winch-in" stop switch
    • Able to accept other body brands
    • 25' EIPS 1/2" cable w/ 4.5 ton swivel hook
    • Stainless 304 rear guide plates
    • 4 button, in cab, control pendant
    • 1/0 GA battery cables w/ 600 amp fuse & fuse block
    • Imron® Elite black oven * Hitch plate w/ receiver tube and adjustable pintle holes
    • cured paint w/ epoxy primer
    Galion: 100U

    The Galion 100U body is designed for superior service on 9900 -19500 GVWR cab/chassis'. The 100U features all 10 gauge high tensile steel floors, tailgate, head sheets and sides. Front corner posts, two intermediate side braces, full depth rear corner posts and boxed "material shedding" top rails are also standard.

    DuraClass: Yardbird

    The DuraClass Yardbird is the dump body of choice for contractors and municipalities who don't want to compromise on quality and durability. The Yardbird features our patented DuraClass design, with a continuous formed body sidewall and fully enclosed top rail for superior resistance to moisture and corrosion. Yardbird, like all DuraClass dump bodies, uses high tensile steel and fully welded construction for outstanding strength while saving precious weight.

    The double-wall body side, a standard Yardbird feature, withstands punishing loads and always looks good. The full depth rear corner posts and enclosed front corner posts, plus our famous interlaced understructure give Yardbird uncommon strength and rigidity for a light duty dump body. Yardbirds come standard with quick release upper tailgate pins, 1/4 cabshield with window and heavy duty tailgate hardware. Choose from additional options including a crossmemberless understructure, drop sides, and stainless steel construction.

    DuraMag: S Series

    The DuraMag® Service Body is designed for continuous hard work with full length, heavy duty, long sills. What separates this body from the competition is the understructure; the difference is stunning. The general body construction is fully welded—never riveted or screwed together. Our proprietary door extrusions, coupled with compression latches and automotive bulb seals, produce the most watertight compartments available. The black polymer door latches are rivet-less for additional protection. All vertical compartments incorporate nitrogen struts to optimize performance in cold environments.

    All DuraMag® bodies are fully powder coated. All lights are factory wired and installed. NEW Swing Door Locking System

      Standard Features:
    • All Aluminum (6000 Series) Understructure with Extruded Box Tube
    • Swing Doors with Nitrogen Props on Vertical Compartments
    • Extreme Duty (6000 Series) .625 Interlocking Extruded Aluminum Floor
    • Welded Fender Flares for Superior Strength and Rigidity
    • Option Colors Available:
      • Black
      • Red GM/Dodge Red and Ford Red
    • 3/16 – Smooth Aluminum Compartment Tops and Inner Bed Walls
    • Adjustable Shelving in Front, Middle, and Rear Compartments (one shelf with dividers in each compartment)
    • Strongest Built Aluminum Service Body in the Industry
    • Heavy Slam Latch Tailgate with Stainless Steel Lock Rods
    • Black Polymer Rivetless Door Handles
    • Fully Welded Construction – No Rivets, Screws, or Bolts to Come Loose
    • Powder Coated – Standard: White
    • LED Marker Lights (where required)
    • LED Penny Light in Each Compartment
    • LED Ultra-thin 6” Round Stop/Turn/Tail/Backup Body Lights
    • Continuous Aluminum Piano Door Hinge
    • Pass-through Panel between Front & Center Compartments
    • Tread Plate Splash Guards on Front Wall – All Models
    • Best 10 Year Warranty in the Industry
    DuraMag: Dump Body

    DuraMag® Aluminum dump bodies are recognized as Best in Class

    The DuraMag Smooth Side Dump Body sports clean lines and a stylish appearance. The double walled sides allow for superior strength without the risk of interior impacts printing through to the outside.

    High Performance in Commercial Use

    DuraMag® Aluminum Dump Bodies are recognized as Best in Class: Stronger than your typical steel dump body with all the benefits of Aluminum: NO RUST, Eco-friendly, increased payload, better ride, approximately 10% fuel savings.

    DuraMag® offers two versions of Dump Bodies to cover all your needs – the HD Smooth Side and Eco.

    • HD Smooth – DuraMag’s most common dump body
    • Eco – The DuraMag® Eco Dump Body is built for non commercial, lighter duty workloads

    Bottom Line: DuraMag builds the bodies that save you money AND make you look good.

    Blue Ridge Manufacturing: ProContractor Body

    The stylish ProContractor bed has it all. The ProContractor's unique design is like no other commercial truck. With several Box locations, fold-down sides, optional tool box extenders, and a material rack, this bed really earns it's name. A 30,000# gooseneck hitch is standard. Western style lights in both the bulkhead & tail skirt ensure safe lighting with all loads. Cargo control is a breeze. Standard is a PPG Powder Coat black finish to stand up to the elements.

    Standard Features:

    • 1/8" TP Deck
    • Stake Pockets and Rub Rails
    • Plug-In Wire Harness
    • Recessed Lights, Body
    • Recessed Lights, Bulkhead
    • Recessed Tag Well
    • GN-Hitch, 30,000 lbs.
    • Clear View Window
    • Asphalt Undercoating
    • Powder Coat Finish

    Blue Ridge Manufacturing: Montana
    Montana Truck Bed, 8.5', 9.5' & 11.5' {MT9.5DI}
  • HD 1/8" TP Steel Floor (90" Wide DW & 82" Wide SW)
  • Outside Rub Rails & Stake Pockets, sides only (Adds 4" to body width)
  • Goose-neck hitch compartment w/trap door and ball mounting plate, 1 1/2" hole, 30,000#
  • Tapered front & rear corners
  • 2" 14,000# receiver hitch
  • 4" removable side rails, (Anti-Rattle Design)
  • Gas fill access door, Billet Aluminum
  • Radius 4x3" Tube Bulkhead with full width tube window, conforms to cab
  • Bulkhead reinforced to long sills
  • Running boards & step bumper w/ tread plate step pads
  • Bulkhead lights, 2 LED Stop/Tail/Turn, & center mounted back-up lamp
  • TP Tail Skirt w/ recessed tag compartment & LED S/T/T light boxes
  • 7" channel long rails, pierced frame design
  • 3" channel cross sills on 16" centers (avg)
  • Reinforced wheel well compartments
  • Four(4) flush door under-body tool boxes
  • Asphalt Under coating
  • FMVSS-108 lighting compliant
  • Modular wire harness w/ recesses shock mounted sealed lamps
  • Shot blasted, Iron Phosphate & steam pre-treatment
  • High Gloss Black Powder Coat Finish
  • Complete mounting hardware kit w/ shear plates included
  • Blue Ridge Manufacturing: Rodeo

    The stylish Rodeo bed has it all. The Rodeo offers that rugged custom look of a western bed, secure pockets & rub rails, 30,000# gooseneck hitch, our Rodeo bulkhead with a full unobstructed rear window, recessed lights, full stop/tail/turn bulkhead lights and a tough but stylish radius tube frame. Standard is a PPG Powder Coat black finish to stand up to the elements. All that style and the quality you have grown to expect from Freedom Truck Beds.

      Standard Features
    • 1/8" TP Deck
    • Stake Pockets & Rub Rails
    • Plug-In Wire Harness
    • Recessed LED Lights, Body
    • Recessed Tag Well
    • GN-Hitch, 30,000 lbs.
    • 2-5/16" GN Ball w/ 1" Rise
    • Dual 7-way Trailer Plugs
    • Clear View Window
    • Asphalt Undercoating
    • Powder Coat Finish
    Blue Ridge Manufacturing: Workhorse

    The Workhorse Bed is built to carry the load. The Workhorse design includes structural channel crossmembers & long sills to make this one tough flatbed. The long sill reinforced bulkhead is the toughest in the industry. Other features include recessed lights, quality wire harness, automotive undercoating, all welded floor construction, and inside stake pockets. Standard is a durable PPG Powder Coat black finish. With endless options this bed can be custom built at a price you can afford.

    Features:

    • Floor: Smooth 11ga. (Std), 3/16", 1/4", & Treadplate 1/8", 3/16", 1/4" & PT Pine, Apitong, Rumber
    • Structural Crossmembers: 3"(Std) 4" on 12'-26' HD Bodies
    • Crossmember Spacing: 16”(Std), Optional 12"
    • Structural channel long rails: 6"(Std), Optional 7", 8"
    • Stake Pockets incorporated in floor plate for a smooth side rail
    • Gas Fill cut outs, semi-blanked Ford, Chevy Dodge
    • 42” Bulkhead with large slotted window, 48" beds 18' & larger (Many Optional Bulkhead styles and sizes)
    • 3/16” smooth steel drop center tail skirt w/ recessed LED marker lights
    • Bulkhead reinforced to long sills
    • Adjustable universal bolt on mud flap brackets
    • Asphalt Undercoating
    • FMVSS-108 lighting compliant
    • Modular wire harness w/ recesses shock mounted LED sealed lamps
    • Shot blasted, Zirconium Phosphate & steam pre-treatment
    • High Gloss PPG Black Powder Coat Finish
    • Complete mounting hardware kit w/ shear plates included
    Blue Ridge Manufacturing: Canyon

    Specifications

    • Floor: 11ga.(Std) Optional 10ga, 3/16" or 1/4"
    • Structural Crossmembers: 3"(Std) 4" on 12'-24' HD Bodies
    • Crossmember Spacing: 16”(Std), Optional 12"
    • Structural channel long rails: 6"(Std), Optional 7", 8"
    • 42" Bulkhead, 11ga. smooth plate
    • HD 42" Steel Sides, Optional 18,24,36,48,60 and 72"
    • HD 42" Barn Doors, Optional 18,24,36,48,60 and 72"
    • Scamper ladder on road side, fold down, high visibility Red
    • Tarp Guard 10" high, Tarp system ready
    • 3/16" smooth steel drop center tail skirt w/ recessed marker lights
    • Bulkhead reinforced to long sills
    • Adjustable universal bolt on mud flap brackets
    • Asphalt Undercoating
    • FMVSS-108 lighting compliant
    • Modular wire harness w/ recesses shock mounted sealed lamps
    • Shot blasted, Iron Phosphate & steam pre-treatment
    • High Gloss PPG Black Powder Coat Finish
    • Complete mounting hardware kit w/ shear plates included
    Blue Ridge Manufacturing: LoadPro

    Specifications

    • 3-8 Yard Capacity
    • 3/16ga. smooth steel floor
    • 3” structural channel cross sills on 16” centers
    • 6” structural channel long rails
    • 40” Bulkhead w/ slotted window
    • ¼ Cab Shield, Tarp system ready
    • HD Steel Sides w/ formed top rail
    • HD Dump Gate, front release
    • 3/16” smooth steel tail skirt w/ recessed marker lights
    • Adjustable bolt on mud flap brackets
    • Modular wire harness w/ recessed shock mounted sealed lamps
    • FMVSS-108 lighting compliant
    • Asphalt Automotive Undercoating
    • Shot blasted, Iron Phosphate & steam pre-treatment
    • High Gloss PPG Black Powder Coat Finish
    • Complete mounting hardware kit w/ shear plates included
    Easterner: Steel Dump Body (5-7 Yard)
  • 19" side height.
  • 24" tailgate height.
  • 96" body width.
  • 10-gauge steel sides with fully boxed dirt-shedding top rail.
  • Sides include three vertcial braces with radius corner bends.
  • 10-gauge steel floor.
  • 10-gauge steel front panel/fully boxed top rail.
  • 10-gauge fully boxed perimeter tailgate - 6-panel design.
  • 4" structural steel crossmembers on 12" centers.
  • 7" structural longitudinals.
  • Recessed stop/tail/turn lights in rear posts.
  • All appearance corners have radius bends.
  • 1/2 cab protector is standard.
  • Standard board gussets [fits 1 board per side].
  • M H EBY: Renegade

    We designed the all-aluminum Eby Renegade service body with standard features that exceed expectations. Our custom extruded aluminum sub-structure provides a strong, robust platform that is lighter than steel. Larger cabinets and more volume in the load compartment allow you to store more tools and essentials to the job site.

    The rock solid flush-mounted tailgate, sealed doors, and tapered rear corners are designed for easy of use and durability. LED lighting comes standard inside each storage cabinet for maximum visibility. Keyless cabinet entry and additional LED lighting available. We make it easy to install with a universal mounting kit, and back it with the best warranty in the industry.

    M H EBY: Rush
    This strong, light-weight van body really delivers, hauling more payload and saving fuel costs with every trip. We designed our all aluminum van body with final mile delivery drivers in mind. Strong, user-friendly, and tough enough to stand up to any kind of duty cycle, whether it's urban delivery or interstate hauling.
    M H EBY: Big Country

    The heavy duty flatbed for work on the job site, on the farm, or anywhere. The EBY BIG COUNTRY flatbed towing body was made for big jobs. With a standard trap-door for a gooseneck hitch, you can pull your EBY livestock trailer, equipment trailer, or even an RV and still have plenty of room for cargo in the bed. Heavy-duty aluminum construction means your Big Country bed will take whatever you dish out and always look great no matter what chassis you put it on.

    Standard Features:

    • Tapered bulkhead with integrated high mount LED combo and work lights for terrific visibility and lots of light for night work
    • EBY Exclusive 20" extruded buck-plate with cast aluminum corners and LED tail lights provides great styling and durability
    • HD .156" diamond plate floor hauls anything from pallets of cement to feed for cattle
    • Tapered rear corners give you the widest possible turn radius for your trailer
    • Sub-Structure is 5" j-sills and 3" cross members for cab and chassis
    • Sub-Structure is 3" wide x 5" thick flat bar and 3" cross-members on pick-up box deletes
    • Rear window grill tapered to match cab and punched to allow maximum rear visibility
    • HD Aluminum 5" high extruded side rails with stake pockets and rub-rails for tie-downs
    • Formed aluminum wing brackets transition from bulkhead to body and help retain cargo
    • EZ-Open trap door to access gooseneck hitch
    • EBY mounting kits are provided at no extra charge!
    M H EBY: Free Country

    The heavy duty flatbed you love, now with full skirted sides & integrated cabinets! The tough, versatile EBY Big Country flatbed is famous all over the country. The all new Free Country skirted flatbed takes towing bodies to the next level! This flatbed includes integrated cabinets on both sides for tool storage, custom tie down brackets, a gooseneck hitch trap door, as well as integrated steps and custom LED lighting which means you have everything you need to get the job done.

      Standard Features:
    • Tapered bulkhead with integrated high mount LED combo and work lights for terrific visibility and lots of light for night work
    • 23" formed aluminum buck-plate with LED tail lights provides great styling and durability
    • HD .140" diamond plate floor hauls anything from pallets of cement to feed for cattle
    • Easy access step recessed into each side forward of wheel opening
    • (2) Cabinets per side with locking chrome tee handle
    • Tapered rear corners give you the widest possible turn radius for your trailer
    • Sub-Structure is 5" J-sills and 3" cross members for cab and chassis
    • Sub-Structure is 3" wide x 5" thick flat bar and 3" cross-members on pick-up box deletes
    • Rear window grill tapered to match cab and punched to allow maximum rear visibility
    • Extruded top rail with full length slot for cargo tie-downs
    • Formed aluminum wing brackets transition from bulkhead to body and help retain cargo
    • EZ-Open trap door to access gooseneck hitch
    • EBY mounting kits and adjustable cargo tie downs are included with each body

    The all aluminum Eby FLEX features strong, lightweight side and rear panels that can be removed in seconds, turning your landscaping truck into a flatbed. We added a cab protector with room on top for 2 wheelbarrows, and plenty of points to tie them down. The tarp is standard, and is tucked out of the way when you don't need it. The Harsh hoist and our custom-designed sub-frame complete a dump assembly that's the best in the business.

    Economy MFG Co.: Dovetail Landscape Dump

    Economy Manufacturing was also born out of necessity. In the early 1930's, the automobile was becoming very popular. However cars in those days did not have trunks or storage. Pete Hanes, a local welder and inventor had a solution - a unique one wheel trailer.

    The trailer was designed to be pulled or pushed by a car with its swivel wheel spinning around to adapt to whatever the situation.

    The demand was overwhelming and soon the popular trailer (the first of its kind in the nation) was being shipped throughout the U.S. and Canada. As imitation is the highest form of flattery, Sears and Wards soon began to complement 'Pete Hanes' invention by introducing models of their own. This, coupled with trunk space offered in new car models, shifted Economy's focus to the needs of farmers and ranchers.

    That ingenious trailer was just the beginning of a long line of products Economy has launched to fill a particular need.

    Enoven: EWP Series

    The flatbed is a very popular product. Its main job is to take things from one point to another. A Stakebed is a flatbed with some removable or permanent gates of various heights (40? most common) to carry taller cargo and have it remain on the bed. All Flatbeds and Stakebeds typically come with a standard square headboard to protect the cab from damage.

    There are many options available for the Flatbed and Stakebed such as a liftgate to help get heavy items on and off the bed, under bed tool boxes, HD trailer hitch and wiring, tapered headboard, steel overlay on floor for added strength and longevity (smooth or diamond plate), cranes, tool boxes on top of the bed, HD material rack and many more

    Enoven: E-Series

    Dump Bodies come in a variety of styles. The steel dump is useful for carrying and dumping heavy cargo and it takes a good deal of abuse from materials such as rocks, gravel and dirt. This is also becoming more popular in aluminum to save weight and fuel, plus avoid the potential problem of corrosion.

    The flatbed or stakebed dump can be very helpful for those who need a dump occasionally. The landscape dump body is a favorite with landscapers and generally is a flatbed with solid wood or steel sides and a swing away gate system at the rear. It is not meant for heavy items generally, but clippings, brush and similar materials. You can also get a dump body for a pickup truck, as either an insert or utilizing the truck bed as a dump.

    Some of what Enoven offers.

    Fisher: Snowplow

    For more than 70 years we’ve been building plows and spreaders for way-makers.

    FISHER® NATION doesn’t stand to the side waiting for someone else to clear a path. You go where others haven’t. And the way we see it, it’s our job to keep making the equipment that works harder for longer—making you more money and keeping you a step ahead.

    General Truck Body: Flatbed Body

    If your hauling and towing needs require a flatbed truck or a gooseneck, then General Truck Body is your Work Truck Headquarters.

    Our standard duty flatbed trucks range in size from 8ft to 14ft in length, and we offer Medium Duty flatbeds in sizes from 16ft to 26ft. All of our flatbeds are made of steel. Our steel goosenecks are available in 9’4? and 11’4? lengths.

    Gladiator Trailer Service: Gladiator Demolition Dump Body

    This model is going to give you the high walls for those high-volume jobs. Offered in 18’ & 20’ having our high-capacity hoist and adding in the PTO for power.

    With high walls we make sure to add a step ladder to make it to the top and an electric tarp to make it easy to open and close the top.

    Gladiator Trailer Service: Gladiator Junk Removal Dump Body

    This model is designed for volume, doing a clean out this offers the space needed. Designed at 12’ to 20’ and if needed add the steel backpack, toolbox, tow hitch and based on size this determines the hydraulic hoist. This model has smooth walls perfect for your marketing.

    Gladiator Trailer Service: Gladiator Landscape Body Dump

    If you are looking for something with more space, we have you covered. This model starts at 10’ and can go up to 16’ for more capacity up to 16k. Need more storage for this? You’ll have the options of tool holders, steel backpack and toolboxes. Other options to complete your package are the tow hitch, tarp kit and if you need extra access, we can add side doors to the dump.

    Gladiator Trailer Service: Gladiator Mini Dump

    This is great if you are just getting started this 42” x 84” x 104” model will meet your landscaping needs. From having to haul materials like dirt, bark dust and yard debris. We offer a selection of hoist starting with a 7k.

    This design offers organization and storage. Offering tool holders, toolboxes, tow hitch and tarp kit.

    Gladiator Trailer Service: Gladiator Roofing Dump Body

    Designed with a heavier frame to reinforce the dump body, starting at 12’ to 16’. this model automatically levels up its hoist due to the heavy frame. Need more power? We have the PTO as an option. Storage?

    We have the toolboxes, the tow package for hauling and the tarp kits to keep everything enclosed for safety.

    Gladiator Trailer Service: Gladiator Flat Bed

    Commonly used to transport bulk goods, we offer from 10’ to 24’ to meet your needs. Choose from wood flooring, smooth metal flooring or diamond flooring.

    Complete the package with the tow hitch, the pocket stakes, and toolboxes for storage. There is always an option to add a hydraulic hoist.

    Gladiator Trailer Service: Gladiator Dump Low Profile Light Duty

    With the low profile you have the drop-down sides, choose from 12”, 18” and 24” walls for construction us.

    This model offers heavy-duty floors using 3/16” material and electric double acting rear gate for easy access. Based on the truck add in your toolbox, tow hitch and tarp kit.

    Gladiator Trailer Service: Gladiator Pickup Dump Conversion

    We offer two models for this conversion, both options require some modifications. The first option is inserting a dump truck into your current bed. This model can be done with a pick-up’s year 2015 and newer.

    The second option is a dump truck hoist conversion, this option allows you to keep your current bed and just add a hoist kit. The second option is done with pick ups year 2015 and older.

    Gladiator Trailer Service: Gladiator Chipper Box

    Designed to haul wood chips away from worksites and often tow a woodchipper so it can direct wood chips straight into the truck’s semi-enclosed chip box. This model is offered in 12’ & 18’, with 6’ ceilings and a smooth body is perfect for your signage.

    Safe access to the roof to take advantage of the top rack. Make it a whole package with the tow kit, toolboxes, and steel backpack. Safety is important to us, with this model top lights will always be required.

    Godwin: 184U

    This body is available in lengths of 8' to 11' in 1' increments. Inside width from side to side is 84".

      Features:
    • SIDES: One piece sides with no welded seams. 10 gauge A607 grade-50 high tensile steel with boxed top rail and fully welded boxed rear corner post. 6" side board gussets with full length rub rails, and box-type sidebraces.
    • RUB RAILS: Full length 45 degree deflector panels are an integral part of the sides.
    • FLOOR: 10 gauge two-piece high tensile steel floor with 2" floor to side radius. A607 grade-50 steel.
    • FRONT WALL: 10 gauge high tensile A607 grade 50 steel. Full width integral inverted V-type horizontal bracing.
    • TAILGATE: 3 Panel fully boxed 10 gauge high tensile A607 grade 50 steel with boxed horizontal reinforcements and sloping lower deflector. Tailgate is 6" higher than side.
    • TAILGATE HARDWARE: Heavy duty: Standard upper hardware is offset cast steel hinge. Lower hook is cast steel: engages tailgate pin from top. Banjo eye keeps tailgate chain in position you select.
    • LIGHTS & REFLECTORS: FMVSS 108 lights are standard, recessed for protection, rubber mounted and shock proof.
    • UNDERSTRUCTURE: Completely jig built with 3" structural channel crossmembers on 12" centers and 5" structural channel longitudinal. Crossmembers are gusseted and welded to longitudinals.
    • POPULAR OPTIONS: 36" cab shield, 8 gauge sides, 3/16" one piece floor, fold down 13" sides, 18" sides, quick release upper hardware, other options available.
    Harbor: NeXtGen TradeMaster
    Every Inch the Definition of Quality and Value. From the glistening body finish to the Master Lock System designed to protect the tools of your livelihood, TradeMaster defines quality and value. If you are the best at what you do, why not drive the best? Harbor: Driven by the Best!

    Standard Features:
    • Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
    • Push Button locking system with red band locking indicator
    • Modern gas shocks on each side opening door to keep them open during loading and unloading
    • 8" deep recessed bumper for sure footing when entering bed
    • Armless and self supporting tailgate work table
    • Adjustable, but lockable, shelving system
    • Weather shield system around locks, doors, and hingles, preventing leaks and securing the tools of your trade. Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides
    Harbor: TradeMaster

    From the glistening body finish to the Master Lock System designed to protect the tools of your livelihood, TradeMaster defines quality and value. If you are the best at what you do, why not drive the best? Harbor: Driven by the Best!

    • Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
    • Push Button locking system with red band locking indicator
    • Modern gas shocks on each side opening door to keep them open during loading and unloading
    • 8" deep recessed bumper for sure footing when entering bed
    • Armless and self supporting tailgate work table
    • Adjustable, but lockable, shelving system
    • Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
    • Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.
    Harbor: Standard Contractor Body

    Nearly half a century of cutting edge engineering has created this Standard Contractor model. But there is nothing standard about it! Our flawless well integrated overall design now comes with optional diamond plate steel or extruded aluminum decks and rear fold-down gates. It’s powder-coated head to toe. WOW!

      Standard Features:
    • Side loader rack with extra heavy duty 4x2 longitudinal bars that drop down 4-inches, meaning you can easily carry ladders, forms, or scaffolding.
    • Top deck mounted boxes, addressing a wide variety of storage needs.
    • Gates that fold down in the rear that creates both a work platform and an ease of loading and unloading of equipment into the bed area.
    • Dividable deck area between the space between the boxes, for heavy machinery such as compressors or welders, and the rear platform, for bags of concrete or a wheel barrel.
    • Stainless steel rear apron mounted between the dock bumper uprights , hiding the unsightly under-deck clutter.
    Harbor: General Service

    The General Service (GS) Package adds to the capability of the Plus packaging by adding an additional 4-drawer pack. Why not add yet 2 more drawer packs to improve the utility of storage for small components? Or add shelves to take advantage of the extra height? This is Harbor modularity at its best!

    Plumbing Heating and Ventilation service technicians need to carry bottles of Nitro, CO2 or Brazing torch gases to pressure test systems, purge a system, blow out coils, or solder or repair lines. The PHVAC package is designed to satisfy your need with a 3-tank holder mounted off the rear shelf panel, four (4) drawer packs, and a lockable storage compartment for valuable components. How about adding a drop-down rack for your different size ladders that help you get to that system? Keep your tanks at 40 cu.ft. or less if you have to carry them up the ladder!

      Standard Features:
    • (2) Shelving Units on the Driver's Side with Drop In Dividers on the Second Shelf from the Top
    • (1) Shelving Unit on the Passenger's Side with Drop In Dividers on the Second Shelf from the Top
    • (2) 2-Drawer Pack on the Driver's Side
    • (2) 3-Drawer Pack on the Passenger's Side
    • (1) Hanger Hooks
    • (1) Drop Down Door, creating a lockable compartment on the Driver's Side
    • (1) Tank Holder for (3) 30 lb. tanks
    • Partition
    Harbor: WorkMaster

    The WorkMaster secures the tools of your trade unlike any other enclosed service body. Constructed with steel, built like a vault, the “walk-in” WorkMaster is designed for heavier-duty cutaway vans…and we have been known to mount them on a chassis or two. The WorkMaster is constructed in different lengths and heights to meet your every tool, material storage, and interior height (up to 6’3?) requirement. Need to carry more than your typical van? This is your truck!

    • Tightest security system in town, featuring double-bit keys and a Master Lock internal locking system
    • Modern gas shocks on each side opening door to keep them open during loading and unloading
    • Rear side access door for storage of conduit or other long (10-ft.) materials
    • 12" step bumper and side-wall grab handles for ease of entrance into the bed
    • Interior ladder storage on hooks mounted along inside shelf Weights up to 300 lbs. lighter than competing brands using FRP
    • Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
    • Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.
    Harbor: Black Boss

    Platform bodies promise unyielding quality and reliability. Whether your business is hauling stuff or you’re hauling stuff for business, these platform bodies go the distance!

      Standard Features:
    • Choice of diamond/smooth plate steel deck, aluminum iso-mounted deck, or 7/8" hardwood apitong deck (apitong deck only available for CA, AZ, and NV customers)
    • Square turret-punched headboard, made of a tough 12 gauge galvanized sheet and 2" x 2" tubular frame
    • Stainless rear apron between the dock bumper uprights to hide unsightly clutter under the bed
    • Glossy black coating
    Harbor: ComboMaster

    Nearly half a century of cutting edge engineering coupled with our obsession to create the perfect contractor body resulted in this design. You told us you want more space. So we created the ComboMaster series which boasts more work and storage space than any comparable contractor body in its class. Want a super-mega version? Ask about our Maxi Combo.

      Standard Features:
    • 36-inch Rear platform with fold-down 10-inch and two 33"Lx 10"H x 19"D under-deck storage compartments.
    • Overcab rack legs attach to the back of the horizontal compartment, giving extra work room on the platform, yet able to store a 15-ft. ladder with ease.
    • Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
    • Push Button locking system with red band locking indicator
    • Modern gas shocks on each side opening door to keep them open during loading and unloading
    • 8" deep recessed bumper for sure footing when entering bed
    • Adjustable, but lockable, shelving system
    • Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
    • Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.
      Options:
    • Conduit Boxes
    • Rack straps that ratchet to 500 lb. pressure
    • Master Lock system
    • AOK (All-One-Key) Locking. Makes your ignition key locks everything!
    • Hitches that integrate with the bumper brackets
    • Spray-On Bedliner
    • Vise Brackets and Pipe Holders
    • Multiple roll-out drawer packages and slide-out trays
    • Light bars, beacons, work lights, and other lighting options
    • 110-Volt Electrical Inverters
    • Rear Back-Up Alarm
    Harbor: Black Boss Stake Bed

    Platform bodies promise unyielding quality and reliability. Whether your business is hauling stuff or you’re hauling stuff for business, these platform bodies go the distance!

      Standard Features:
    • Choice of diamond/smooth plate steel deck, aluminum iso-mounted deck, or 7/8" hardwood apitong deck (apitong deck only available for CA, AZ, and NV customers)
    • Square turret-punched headboard, made of a tough 12 gauge galvanized sheet and 2" x 2" tubular frame
    • Stainless rear apron between the dock bumper uprights to hide unsightly clutter under the bed
    • Glossy black coating
    Harbor: SawMaster

    This exquisitely crafted “tough-to-the-core” vehicle is a stunning example of how listening to your customers makes a difference. The SawMaster design resulted from collaboration between Harbor, a local concrete equipment dealer, and several customers. It started with the question of how to best carry slurry tanks, heavy saws, giant blades, and a myriad of concrete saw cutting paraphernalia and other stuff. The design received high praise at the national “World of Concrete” show in Las Vegas and quickly gained traction to become the industry-leading design for concrete saw cutters.

    All because our wonderfully enthusiastic and indefatigable Inside Sales Manager listened to what our customers wanted, and then helped make it happen! That’s why Harbor is Driven by the Best!

      Standard Features
    • Ample deck space to store saws and slurry tanks
    • Street side compartment with specialized threaded hangers to secure 24" and 36" saw blades, with enough room to hold a hand saw and fuel container
    • Curb side compartment with specialized holders for two corning machines, four larger corning bits, and specialized shelves to hold just about any corning bit you can imagine!
    • Four additional compartments for storage of hose reels, aerosol cans, and many other supplies
    • Heavy duty double-walled rear side panel with optional rear access door
    • Reinforced front floor designed to support 220 to 330 gallon service tanks and enough room to install an Onan or Hanco generator (and that's after the slurry tanks and large saws and blades are stored on the deck!)
    • Adequate spacing under the deck to mount tank fittings, controls, hose reels, and pressure washers
    • Palfinger Cantilever Liftgate for easy loading and unloading of heavy saws
    Harbor: Master Landscape Dump

    To create the toughest landscape body in the business, start with a Black Boss flatbed. Then add 40” solid-side gates of steel or MDO plywood (see specifics below), swing-away rear gates, and one of the toughest white coatings available. And for the ultimate truck, add a steel floor (smooth or tread plate) and a Rugby dump hoist. Voila! You just created the best Lansdscaper vehicle in the business.

    Standard Features:

    • Choice of diamond/smooth plate steel deck, aluminum iso-mounted deck, or 7/8”hardwood aptitong deck (aptiton deck only available for CA, AZ, and NV customers)
    • Square turret-punched headboard, made of a tough 12 gauge galvanized sheet and 2" x 2" tubular frame
    • Stainless rear apron between the dock bumper uprigths to hide unsightly clutter under the bed
    • Glossy white coating
    Heiser: Flatbed

    We fabricate our own "Heiser Heavy-Duty" flatbed bodies, made of structural steel, not stamped steel.

    Call us to discuss your requirements

    Heiser: Stake Bed

    We fabricate our own "Heiser Heavy-Duty" flatbed bodies, made of structural steel, not stamped steel.

    Call us to discuss your requirements

    Hillsboro: 2000 Series Aluminum

    Hillsboro Industries has over 3 billion miles of experience building aluminum truck beds. This 2000-series model is perfect for Ford, Ram or GM single and dual-wheel trucks. Our all-aluminum construction makes the bed lighter and more fuel-efficient while also enhancing its appearance without the need for paint. Built to be corrosion-resistant, Hillsboro truck beds are backed by an industry-leading three-year limited warranty.

    Hillsboro: 2500 Series Aluminum

    Hillsboro’s 2500 Series Aluminum Truck Bed builds upon the success of our original design to allow for even smoother loading, unloading and transporting. This flatbed showcases industry-leading features like our heavy-duty aluminum floor so it can work as hard as you. Built to be corrosion-resistant, Hillsboro truck beds are also backed by a three-year warranty. Plus, Hillsboro is the only manufacturer to test its aluminum truck beds to SAE towing standards.

    Hillsboro: 3000 Series Aluminum

    The Hillsboro 3000 Series Aluminum Truck Bed adds a new headache rack and fold-down sides with slam latches to a tried-and-true design. This bed carries innovative features like an extruded aluminum floor to make sure your truck stays strong and beautiful after years of heavy use, and we’re so confident in its quality that we back it with a three-year warranty.

    Hillsboro: 3500 Series Aluminum

    Leading the industry in durability, the Hillsboro 3500 Series Aluminum Bed includes features to prevent damage on every part of your truck, right down to your wiring and toolboxes. Our extruded floors offer more than double the strength of traditional sheet floors to help you carry your heaviest loads with ease. Backed by a three-year warranty, this Hillsboro bed will stand up to the worst of your day-to-day transport. Choose between an array of sizes and weights to find the best fit for your Ram, Ford or GM truck.

    Hillsboro: 4000 Series Aluminum

    The latest in Hillsboro’s series of aluminum truck beds adds fold-down sides, stainless steel flip-up tie-downs and more to our popular 3000-series model. The full-aluminum build of this bed provides more durability and fuel efficiency with less weight and no pesky paint. Plus, the truck bed is B&W-compatible, so just add on a Hillsboro kit for easy conversion. Find a dealer near you to prepare for a smoother, sleeker transport.

    Hillsboro: GII Steel

    Meet the second generation in Hillsboro Industries’ steel truck beds. This model features sides with greasable hinges, slam latches and rubber bump stops for more convenient loading and towing. Plus, this bed uses PPG epoxy primer and polyurethane paint so your truck continues to shine for years to come. You can drive a Hillsboro steel bed with confidence, knowing that it’s backed by an industry-leading two-year warranty.

    Hillsboro: SLT Steel

    The Hillsboro SLT Steel Truck Bed offers rugged construction and superior quality with features designed to add convenience to your daily activities. Backed by a two-year warranty, this truck bed will be with you for the long haul. Hillsboro is the only manufacturer on the market to test its steel truck beds to SAE towing standards, so when you purchase one of our beds, know that our listed payload and towing capacities are honest and authentic.

    Iroquois: Brave Series Steel

    A stylish areodynamic body design, combined with high quality manufacturing for long lasting value. Built strong with 10 guage steel for the floor, front headboard and side panels.

    Standard Features:

    • 10 gauge steel front, sides and floor
    • 12 gauge "double panel" tailgate
    • 3" structural channel crossmembers (4.2 lbs./ft.) on approx. 13" centers
    • Structural channel longsills
    • Pro-Latch tailgate "quick release" system
    • Slanted "double panel" tailgate
    • Rounded (6" face) and rear (7" face) corner posts
    • Tubular boxed top rail
    • Dirt shedding rails
    • Outboard-mounted spreader chain
    • 1/4 cab protector(14")
    • Plasma cut hardware
    • Lo-mount design
    • Shock / Recessed clearance lights per FMVSS

    Jerr-Dan: Standard Duty Carriers

    These carriers never quit, and offer the best features in the business: strength, stability, and rapid hydraulics during loading and unloading—helping you work faster and safer so you can get to the next job faster.

    Jerr-Dan: Standard Duty Wreckers

    Jerr-Dan wreckers are designed and built for strength, reliability and durability. From light duty models that include the MPL and HPL lines, to the heavy duty wreckers that are available in 25, 35 or 50-ton configurations, all Jerr-Dan wreckers are built with high strength steel and designed for maximum power.

    Kidron: K2

    K2 reefer truck bodies by Kidron continue a tradition that spans nearly a century – a longtime commitment over generations to create high value refrigerated distribution units that can handle the rigors of frequent stops and changing temperature requirements.

    Kidron K2 refrigerated truck bodies work the tough city streets, sustaining and recovering desirable temperatures in spite of frequent door openings.

    Kidron K2 refrigerated box truck bodies also work the long haul, reliably performing in all kinds of adverse weather conditions to safely protect cargo in desert heat and frigid climates, including places where product service simply isn’t available.

    For special multi-stop challenges, Kidron continues to be a step ahead with unique compartmentalization options to simultaneously transport and protect ice cream, milk, produce and other types of cargo.

    Kidron has the best refrigerated box trucks, refrigerated trucks, and reefer trucks for sale!

    Plus, Kidron has other options designed to accommodate specific cargo and delivery requirements as well as encourage driver safety while reducing fatigue – all the result of Kidron’s longtime knowledge and experience. Because nobody knows cold like Kidron.

    Kilar Fabrication: Aluminum 10 Series

    Kilar Fabrication takes pride in manufacturing carriers with the highest quality components. At Kilar, we design carriers that meet the specific needs of each customer. Our standard carrier package can be modified to meet the demands of your business. All our products are engineered to withstand the most challenging work. Kilar can build a custom carrier to work for you.

    Kilar Fabrication: Steel 10 Series

    Our steel carriers feature structural steel "C" channel cross members, which prevent erosion. The crossmember spacing is 8" on center, rather than 12". An aluminum shield for the steel carrier or a wooden bed are options available upon request.

    Maintainer: MTS 2-Ton

    • 12 ga. A60 Galvannealed Construction
    • One-Piece Aluminum Door Construction
    • Reinforced Cabinet Floors w/ Intregal Clean-Out Drains
    • Three Point, D-Ring Door Latches
    • Gas Spring Door Holders/Closures
    • Infinitely Adjustable Shelving
    • 49 in. Wide Center Deck
    • 10 in. Swing-Down Tailgate
    • 12 in. Step Bumper w/2 in. Square, Class IV Hitch
    • Specifications:

      • 62" Compartment height
      • 145.1 Compartment Cubic Feet (11' body)
      • 200.7 Compartment Cubic Feet (14' body)
      • 11 Ga. deck plate - A60 galvannealed - compartment top/back material

    Marathon: Aluminum High Cube

    Marathon Van Bodies & Reefers have the Highest Quality Fit and Finish , “They look great”! Since Marathon Bodies are produced, one at a time, with the highest quality components owners can count on many years of dependable fleet service.

    The Marathon Industries line of Van Bodies includes Moving Vans, Dry Freight Aluminum, Dry Freight FRP, Medical Home Delivery Vans, Euro Curtain models and Reefer Van Bodies.

    Marathon: Stake Bed

    Marathon Stake beds have the Highest Quality Fit and Finish. Since all Marathon Bodies are produced one at a time, with the highest quality components, owners can count on many years of dependable fleet service.

    The Marathon Industries’ line of Stake Bodies includes standard Light, Medium and Heavy duty Stake & Flat Beds, Contractor Bodies, Studio Stake beds, and Aluminum Stake beds.

    Martin: Landscape Dump

    Your commercial trucks carry the entire weight of your business and you need them up and running. You can count on Martin's Quality Truck Body to keep your commercial trucks maintained and repaired in a timely fashion, with quality parts and expert work.

    There is a lot more to commercial trucks than just a body and an engine. Flatbed trucks need a specialized bed, hydraulics, and lifting equipment installed. Stake bed and dump body trucks also need specialized beds and other equipment. You don’t want this particular work and these custom installations done by just anybody, you need the certified mechanics at Martin’s Quality Truck Body.

    They don’t just customize the body, hydraulics, and bed of your trucks, they also install electric hoists, power take offs, lift gates, and custom toolboxes. They don’t only handle your custom installations, but they will also maintain and repair all components of your commercial truck:

  • Body Work—Martin’s Quality Truck Body specializes in customizing your chassis, suspension, and springs to support the needs of your particular enterprise. Whether you’re adding a hoist or a flat bed, they will verify that your truck can handle not just the new equipment, but the load that you are hauling or towing.
  • Custom Paint—You need your commercial trucks to reflect your business and logo, as well as draw in new customers. Martin’s Quality Truck Body will paint and detail your fleet with stunning art work that sets you apart from your competitors.
  • Regular Maintenance—Getting oil changes, new filters, lubrication, and having other maintenance done will limit breakdowns and lengthen the life of your trucks. When you get more miles out of your trucks, you get more business out of your trucks.
  • Masterack: General Service
    General service contractors bring a lot to the jobsite and staying organized is key to productivity. Your cargo van needs to have the right storage to keep tools, parts and other items secure and easily in reach, when needed. Drawer cabinets, composite parts bins and a triple utility hook add custom storage to Masterack steel shelving modules in our general contractor package.
    Masterack: Steel General Service

    MASTERACK®’s strong and durable steel interiors are designed to handle the toughest applications. These high quality, heavy duty interiors have been the number one choice for many commercial fleets for more than 45 years. Cost effective and reliable, a MASTERACK® steel package will help keep fleets organized on the road for years to come.

    Mickey Truck Bodies: Dry Freight
    EXTERIOR CONSTRUCTION
  • 0.40 Aluminum Skin
  • REAR FRAME
  • All stainless steel components on rear frame for rust-free, paint-free maintenance
  • Stainless steel rear sill with integral drain trough and drain holes
  • Robotically welded, stainless steel rear corner posts and header are 4” wide at rear
  • Stainless steel exterior gussets at top preventing frame from racking
  • Flush mount LED lights to prevent damage to light
  • REAR DOOR
  • 3/4” thick premium, pre painted wood door with 2” nylon rollers, locking cam lock, rubber side and top seals
  • SUBFRAME
  • Robotically welded, 3” I-beam steel crossmembers on 12” centers
  • Steel front sill to reinforce front wall to subframe
  • 4” I-beam steel longitudinal welded to crossmembers, under coated same as crossmembers
  • LIGHTS
  • All exterior lights are LED and satisfy FMVSS-108 requirements
  • FLOOR
  • 1-1/8” thick laminated hardwood floor boards ship-lapped with 2 staggered screws per floor board per crossmembers
  • ROOF
  • Aluminum sheet with 1” high “anti-snag” roof bows
  • WALL CONSTRUCTION
  • 1-1/4” deep galvanized steel Z-posts on 16” centers with cast aluminum corner caps
  • Miller Industries: Chevron
  • 8,000 lb Hydraulic Winch w/ 50’ Cable
  • Manual Shift Winch Clutch Release
  • Left & Right Side Illuminated Controls
  • Adjustable Rear Stabilizer
  • Mud Flaps
  • Hydraulic Pump
  • One Extension Cylinder
  • Full Function Wheel Lift System
  • Slide-In L-Arms w/ Anti-Theft Storage
  • Back-Up Lights & Alarm
  • Bed Anti-Tilt Lockout
  • Floor Level Sides w/ Stake Pockets (Steel)
  • 11 Key Slot Package (Steel)
  • Pre-Wired Electrical Junction Box
  • NiteHawk Sweepers: Osprey II

    The next generation Osprey II is engineered to perform in the most diverse operating environments. Built on a low profile conventional chassis, this sweeper can excel in any location. 35 years of inspired design and field testing have culminated in the best-in-class sweeping performance of the Osprey II.

    The advanced hydraulic system has the power to sweep anything you throw in front of it. Reliable quiet operation lets you clean where no other sweeper can. Powerful, silent and efficient. There is simply nothing else like it.

    • Advanced Hydraulics –Generate power and reliability where you need it most
    • “Stealth Sweeping” System – Single engine hydraulic design delivers the quietest performance of any sweeper
    • 5 year warranty – longest warranty of any sweeper manufacturer
    • Lowest Cost of Operation – No auxiliary engine delivers performance with efficiency
    • Customized Application – Passenger side brooms, specialized cameras, custom paint - we can build your perfect unit
    • Innovative Controls – User friendly controls customized for operators
    • Longevity – NiteHawk has been producing sweepers for over 45 years.
    • Support – full service dealerships and factory support throughout the US.
    • Driver Friendly – Simple operation, training and No CDL requirement.

    One of our best sellers - and for good reason. The Norstar SR model offers everything you need in a flatbed configuration. If you want a little more from this basic configuration, look over our options list. We have underbody locking tool boxes for additional storage and gooseneck troughs for a towing upgrade, spare tire mounts for the unexpected and a list of other options to personalize your bed for your home or business needs.

    The standard 2.5" receiver allows you to add a hitch for bumper pull cargo and a 2 5/16" gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Durable diamond plate construction and powder coat will make this bed your most faithful assistant for years to come. Tapered corners, 7 way plug with 4 way adapter and recessed 2 5/16" ball and receiver hitch give you a towing package standard. Exposed stake pockets and rub rail ensure you have tie down points for any load, plus the LED lights are standard on all SRs. Full 11 gauge skirted rear bumpers finish off every model as an additional standard feature.

    Palfinger: PAL Pro 20
    PAL Pro 20 is our newest lightweight mechanics body designed to accommodate service cranes up to 20,000 ft. lbs. of lifting capacity and engineered to fit a Class 3-5 chassis. Designed for on and off-road work, the PAL Pro 20 body, features structural reinforcements, 2-piece doors with C-channel stiffeners, automotive door bonding, 316 marine-grade stainless steel hinges, and an E-Coat paint process.


    Standard Options:

    • 40" Standard Compartment Heights with Raised Compartment Options
    • 9' and 11' Standard Configurations
    • Compartment Tops are Reinforced to Prevent Fatigue and Cracking
    • Palfinger Engineered Internal Gussets Prevents Body Cracking
    • Full Length Channel Drip Rails
    • Double Panel Doors with Internal C-channel Stiffeners, Adhered with Structural Adhesive
    • Non-marring Boom Rest
    • Linear Adjustable Front Mounts
    • 316 Marine Grade Stainless Steel Hinges
    • A-60 Galvanealed zinc Coated Steel
    • Rubber Mounted LED Lights
    • E-Coat Primer
    Palfinger: PAL Pro 39

    The PAL Pro 39 is our new weight-optimized generation of bodies available in 9' and 11' configurations. In this development, we discovered new ways to reduce weight to create the lightest steel crane body in the industry without sacrificing durability.

    Features:

    Featuring new light-weight aluminum doors, the PAL Pro 39 offers you a more usable payload and reduced corrosion. Choose from various standard options to meet your service truck needs, including a headache rack, accessory mounting brackets, tail shelf and bumper options, and more.

    PAL Pro 39 is manufactured using 12-gauge A-60 galvanneal steel and features a full-length torsion box understructure interlaced with tubular cross members. Combined with integrated outrigger housings, PAL Pro 39 effectively manages crane forces while preventing flexing and cracking.

    PAL Pro 39 features a 39,000 ft. lbs. crane reinforcement designed to accommodate PALFINGER PSC 3216, 4016, 4025, 5025, and 6025 service cranes.

    PAL Pro 39 is designed to be the lightest steel crane body in the industry without sacrificing durability. The body can be mounted on a dual wheel chassis with a GVWR as low as 14,001 lbs., providing excellent flexibility for a wide range of applications. Threaded weldment options available from the factory make installing top mounted accessories easy. Boom rest, welder, compressor, EnPak, Air-n-Arc and AirPak mounts eliminate the need to drill holes in the body.

    PAL Pro 39 features light-weight aluminum double panel doors that provide rigid performance with internal C-channel stiffeners adhered with structural adhesive. Interior compartments feature aluminum hinges and divider trays that are light-weight and corrosion resistant.

    Interior compartments on the PAL Pro 39 are coated with Zolatone to resist damage commonly caused by tools, chains, and parts. Zolatone provides an additional layer of rust protection and as an added bonus, the coating is white in color and helps to brighten up the interior.

    PAL Pro 39 features either a 12" or 21" deep work bench bumper designed to provide technicians with a useable work surface for field repairs, welding, and more. Each bumper features a 1/4" steel top plate and the 21" bumper adds a thru-compartment for internal storage of long tools and chains. All PAL Pro 39 bumpers come standard with a 2" receiver tube hitch rated to 16,000 lbs. towing capacity.

    Standard Features:

    • 44" Standard Compartment Heights with Raised Compartment Options
    • 9' and 11' Standard Configurations
    • Treadplate Cargo Floor, Load Space Walls and Compartment Tops
    • Hybrid Torsion Box and Ladder Frame
    • Palfinger Engineered Internal Gussets Prevents Body Cracking
    • Full Length Channel Drip Rails
    • Double Panel Doors with Internal C-channel Stiffeners, Adhered with Structural Adhesive
    • Non-marring Boom Rest
    • Workbench Featuring 12" or 21" Bumper, Receiver Hitch, 1/4" Steel Top Plate and Thru Compartment
    • Linear Adjustable Front Mounts
    • Aluminium Doors and Hinges
    • Rubber Mounted LED Lights
    • E-coat Primer
    Palfinger: PAL Pro 43

    When the perfect blending of weight, storage space, strength and durability are what you are looking for then the PAL Pro Series of Crane Bodies are what you need. The PAL Pro 43 will handle any crane rated for a load moment of 43,000 ft/lbs., with a max loading moment of 50,000 ft/lbs. Available in many standard 9' and 11' configurations, it is designed with a hybrid torsion box and ladder frame understructure utilitizing the hightest quality 10ga A60 galvanenneal and structural steel cross members for superior strength.

    The frame, bumper, outrigger tubes and crane box are all integrated to deliver the force of the crane load to the outriggers, leaving the body untouched by the load forces. The body is made from 12ga A60 galvanneal, with treadplate topes and load space. Eight 6,000 lb. tie downs in the floor of the body, a 5/16" top plate on the bumper, 2" hitch receiver and 3 point latching doors are all standard.

    The doors are a two piece top hat design held together with automotive adhesive to eliminate welds, and utilize 316 marine grade stanless steel hinges. All this, plus a 12 step e-coat dip process for the primer and 6 year warranty on the body and hardware -- and you have the new standard in superior crane bodies.

    Ranger Design: Fold-Away Shelving

    At Ranger Design, we’ve been listening to the needs of mobile technicians for the past 25 years. We’ve learned that some tradespeople or delivery professionals need an upfit that allows maximum versatility. For them, we’ve engineered the Fold-Away van shelving system.

    Aluminum fold-away shelving features fold-away shelf trays with gas shocks and hardware and comes in various sizes and weight capacity for all sorts of needs. Our cargo van fold-away shelving is designed to provide you with more space to work, allowing you to be more efficient on the job. You can stop wasting time looking for tools and focus on what really matters: getting the job done. Check out our selection of fold-away shelving below.

    Real Fleet Solutions: Excalibur
    Exaclibur

    Looking to Maximize Your Application Production?

    • Spill Guard Fiberglass Desk Protects the Chassis
    • Full Length 6" Handrails
    • 600 Gallon Main Tank
    • 200 Gallon Split Drop Tank
    • Single Pump Split Plumbing
    • Dual Reels
    RKI: J Series

    RKI offers a full line of accessories to complement your RKI service body. Because we know that proper service body accessories mean maximum performance, our engineers spend extra time designing the best accessory products to help you get your job done right

    RKI: L Series

    RKI offers a full line of accessories to complement your RKI service body. Because we know that proper service body accessories mean maximum performance, our engineers spend extra time designing the best accessory products to help you get your job done right.

    RKI: S Series

    RKI offers a full line of accessories to complement your RKI service body. Because we know that proper service body accessories mean maximum performance, our engineers spend extra time designing the best accessory products to help you get your job done right.

    RKI: T Series

    RKI offers a full line of accessories to complement your RKI service body. Because we know that proper service body accessories mean maximum performance, our engineers spend extra time designing the best accessory products to help you get your job done right.

    Rockport: Cargoport

    Built for the value minded operator whose focus is a well-constructed box with functionality as the main aspect. Low floor entry height and available side and rear door configurations, make Cargoport popular for vocations that include multi-stop deliveries. Cargoport’s flexibility allows the operator to customize this unit if needed creating a vehicle that’s tailored to your specific vocation.

    Rockport: Rockport

    With quality and flexibility as a leading consideration, Rockport is pushing the bar higher with industry leading innovations built into every Rockport body. Features include Aluminum or FRP construction, Aluminum or Translucent Roofing; various flooring options include Laminated Hardwood with interlocking joints for maximum strength, Extruded Aluminum, Marine Grade Plywood and Steel or Aluminum Treadplate Overlay.

    Many other available options allow you to customize The Rock to best suit the needs of your specific application for many years of reliable service.

    Rockport: Workport

    A true workshop on wheels, the ergonomically designed Workport provides both an exceptional and functional way to service your customers. A stand up interior height, heavy duty door hinges and integrated rear access ladders are just a few aspects customers favor.

    The exterior compartments provide ease of access with the convenience of available power locks to keep valuable cargo secure at the push of a button. The flexible Workport can be tailored to your specific needs with available shelving, lighting, accessibility, cargo control and many other features to make this product truly unique to your line of work.

    Rockport: Rockport LE

    Designed for value, the LE includes simple construction with base equipment and limited options offering an alternative to meet or exceed your lead-time and budget requirements. Standard features include aluminum sidewalls, aluminum roof and painted 1 1/8” plywood floor with interlocking joints for maximum strength.

      Standard Features:
    • Aerodynamic Aluminum Top Radius
    • Extruded Aluminum Front Corner Posts
    • High Impact Resistant Front Corner Caps
    • FRP Front Wall
    • FMVSS Lights and Reflectors
    • Recessed LED Clearance Lights
    • LED Cargo Dome Lamp with Switch (3-Way on Cutaway Only) - 17’ or Longer get 2 Dome Lamps
    • LED Tail Lights on Rear Vertical Posts (Availability on Select Models)
    • Seamless Aluminum Sheet with Anti-Snag Interior Roof Bows Located on 24” Centers
    • Coated Steel Rear Structure with 12-Gauge Sides and Header Coated Black, 10-Gauge Footer
    • Flush Rear Sill with Drain Trough
    • ICC Bumper, Steel
    • Roll-Up Rear Door, Full Width, Composite
    • Interior Handle Release
    • .040 Pre-Painted White Aluminum Sidewalls
    • Solid Bucked Rivets on Overlapping Joints and Structural Bonding Intermediate Posts
    • 12” Grab Handles at Rear Door
    • Interior Cargo Floor Length is True to Body Length
    • 5” Long Sills with 3” Formed Steel Crossmembers on 16” Centers
    • 1 1/8” Plywood, Painted, Flat Floor
    • Mud Flaps
    • Undercoating
    Rugby: Eliminator LP Steel

    The Rugby Eliminator LP is the hardest working dump body in the landscape and light construction industries. When landscape and construction contractors need a productive, reliable, and versatile body, they chose the Eliminator LP time after time.

    The steel model features a seamless, one-piece steel floor for optimum strength and durability. Full 9-foot floor length allows for full sheets of plywood or other materials. The Eliminator LP design also features front pillars that incorporate forward facing clearance lights positioned at a 45-degree angle at each corner. Rugby products feature light locations that may assist the installer in meeting FMVSS/CMVSS 108.

    Rugby: Mason Dump Body

    The Rugby Eliminator LP is the hardest working dump body in the landscape and light construction industries. When landscape and construction contractors need a productive, reliable, and versatile body, they chose the Eliminator LP time after time.

    The steel model features a seamless, one-piece steel floor for optimum strength and durability. Full 9-foot floor length allows for full sheets of plywood or other materials. The Eliminator LP design also features front pillars that incorporate forward facing clearance lights positioned at a 45-degree angle at each corner. Rugby products feature light locations that may assist the installer in meeting FMVSS/CMVSS 108.

    Rugby: Titan

    Rugby's Titan Series Dump Bodies are designed to meet your bigger capacity, class 5-7 needs. Titans feature a sleek yet strong look, a dirt-shedding top rail, 10 degree sloped tailgate and radius front corner posts.

    Rugby: Z-Spec

    The Z-Spec Dump Body is designed to be multi-functional, from the integrated 3/4 cab shield to the patented rear EZ-Latch system. This body, with its sleek styling will give you many features not found on conventional dump bodies such as the standard 22" rear board pockets that make hauling the heavy or bulky loads a breeze.

    All Zoresco bodies are painted on carts, so there is never a danger of overspray onto the chassis. Additionally, the fully boxed top rail on all sides and tailgate can be painted underneath, offering maximum coverage and protection.

    Vertical braces are on the sides and the tailgate, and the side rails are at a 45 degree angle to shed dirt, keeping you and those around you on the road safe.

    A once piece floor, radius sides and interlaced cross members complete the construction of the body. Lights are recessed in the rear posts which are flush with the tailgate.

    The Z-Spec Dump Body built with existing Rugby technology, integrated with Zoresco Equipment company specifications and coupled with a Rugby hoist give you a combination that can't beat.

    Rugby: Landscape Dump

    Rugby’s “Landscape Body” is the most versatile and accessible body available. All Rugby Landscape Bodies are designed to meet the toughest standards, featuring a curbside swing-out door and rear barn doors over a drop down tailgate that employs Rugby’s revolutionary EZ-Latch system on the upper pins.

    Rugby: Versa Rack Landscape Dump

    The popular Rugby VersaRack Landscaping Truck features eight removable heavy-duty panels that can be interlocked to provide an extremely rugged stake body, or easily removed, in whole, or in part, to adapt to changing needs on the job…remove all eight panels, and you have a platform body!

    The Landscaping Truck front panels are 53” high and made from 14 gauge steel, corrugated for extra strength. The side and rear panels can be solid or vented and are made from 16 gauge steel that is reinforced with built-in corrugated ribs for added strength. The Landscaping Truck stake posts are on 24” centers with 42” tall panels that come in 4,5, or 6-foot sections depending on body length. All panels are removable with an easy to use lower latching mechanism. The 42” rear doors are vented 16 gauge barn door style swing out gates with greaseable hinges and door holdbacks.

    SH Truck Bodies: Dump
    SH Truck Bodies specializes in rugged construction for your everyday hauling needs to your heaviest hauling applications. Find the truck body that is right for you — and expect the best!


    At SH Truck Bodies we do not think giving our customer what he wants is asking too much, which is why we proudly offer:

    • Custom sizes, options & configurations
    • Shorter than standard industry lead times
    • Full delivery service
    • Some common standard bodies in stock
    • State-of-the-art paint facility / custom colors
    SH Truck Bodies: Flatbed

    Standard Features:

    • 42? or 48? High Weld-On Bulkhead with Screened Window. Also Available in 54? or 60? High
    • 3/4? LED Marker and Clearance Light Kit Meets (FMVSS108). Includes Wiring Harness
    • Primed and Painted Black, (Other Colors Available)
    • Structural Channel Longsills 8’6? – 14’6? | 6? x 8.2 lb. Channel | 16’6? – 20’6? | 7? x 9.8 lb. Channel | 22’6? – 26’6? | 8? x 11.5 lb Channel
    • 3? Structural Crossmembers 12? OC
    • 4? Formed 3/16? Channel Rear Rail with Inset Stake Pockets
    • 10 ga. Smooth Steel or Shiplapped KDAT Pine Floor
    • 10 ga. Formed Side Rails
    • 3/16? Heavy-Duty Exterior Stake Pockets with 3/8? x 2? Rub Rail on Sides
    • Standard Overall Width 96? (Optional 102? Wide)
    Sortimo: Shelf Staxx

    Shelf Staxx is a unique van shelving system constructed of alternative materials that minimally impacts the available payload for your commercial cargo van, enabling you to carry more. Unlike the competition, the base Shelf Staxx van shelving packages come equipped with a row of Sortimo S-Boxxes, which serve both as van drawers and mobile toolboxes, giving you more value and function. A variety of van storage bins, van accessories, van partitions, and van packages can be used in conjunction with Shelf Staxx van shelving for further customization.

    SpaceKap: Compak
    • Transferrable
    • 40/60 Rear Doors
    • Slam Latch System
    • Electric Door Locks
    • 320 Degrees of Accessibility
    • 12V Plug
    • High UV Resistant SK-Gelcoat
    • LED Lighting
    • 1/4” Rubber Mat
    • Universal Design Fit
    SpaceKap: Diablo
    • Transferrable
    • 40/60 Rear Doors
    • Slam Latch System
    • Electric Door Locks
    • Integrated Rain Gutter
    • Integrated Skylights
    • 12V Plug
    • High UV Resistant SK-Gelcoat
    • LED Lighting
    • 1/4” Rubber Mat
    • Universal Design Fit
    SpaceKap: Wild

    Tired of dealing with your unsafe and smelly old service van? WILD is the ideal model for anyone looking for characteristics similar to a regular cargo van. With a 53" interior height, it’s large enough to move around inside, with the added advantage of full-length side doors for easy access from the outside. With optional shelves system, maximizes your space and secure your tools.

    Stahl: Challenger ST

    Challenger ST truck service bodies are rugged, dependable mobile workstations.

    These service bodies offer multiple compartments and large, open cargo space to provide generous storage and hauling room for all your work truck equipment. The storage compartments of Challenger ST service bodies come standard with material trays and can be further configured with optional drawer packages, hooks and additional trays to keep your work truck organized, so you can quickly locate tools and work more efficiently. To protect your assets from theft and the elements, these service bodies also offer convenient keyed-alike locks, double-panel steel doors with fully concealed bolt-on hinges and weather-tight seals.

    Challenger ST service bodies are the classic choice of fleet managers and independent contractors alike for their tough galvanized steel construction, convenient storage and access, and extended years of service.

    Starcraft Bus: Allstar

    Engineered for safety and designed for comfort, the Starcraft Allstar continues to be one the best-selling shuttle buses in the market. Standard equipment that includes a backup camera for safety and 4-inch low standard floor wheel wells for passenger seating comfort makes the Allstar a great addition to your fleet.

      Standard Features
    • LED Exterior Lighting Including: 5 Front Amber, 7 Rear Red, Red Stop/tail and Turn Signal, Backup Clear, Tag Light
    • Rosco Accustyle Manual Exterior Breakaway Mirrors
    • One Piece Fiberglass Front Cap
    • One Piece Fiberglass Rear Cap With Anti-ride Feature and 30"X48" Nominal Rear Egress Window
    • Heavy Die-formed, Black Powder Coated, Steel Bumper
    • Exterior Graphics Package; Blue, Burgundy or Green
    • Grey Padded Vinyl Driver Overhead Panel, Electrical Cover Panel, Access Door, Entry Door and B Pillar Covering
    • Seaspray Fabric Covered Ceiling and Sidewalls
    • Vandal Resistant Frp Above Seat Track to the Transition Panel
    • Interior Led Lighting: Passenger Dome Lights (Qty Pending Length of Vehicle), Driver’s Dome, Entry Stepwell Lights
    • 5/8" Thick Plywood Over Floor Steel Structure
    • Graphite (Black) Gerflor Flooring With White Step Nosing
    • Left Hand Entry Vertical Stainless Steel Grab Rail. Stainless Steel Stanchion With Grey Padded Modesty Panel
    • 36"X36" Upper T-slide Windows Tinted to FMVSS Compliance
    • 36" Wide Clear Opening, Electric Entry Door (Front Lift 138"/139" WB Models Can Only Use 32" Wide Clear Opening Entry Door)
    • Rear Mud Flaps
    Starcraft Bus: Starlite
    The Starlite’s narrow body and small turning radius, allow for easier handing, which will be welcomed by your drivers. In addition, passengers will appreciate the wide entry door and deep steps when entering and exiting the vehicle. The Starlite is the perfect solution for those in the market for a smaller shuttle bus or alternative to a raised roof van.
    Stellar Industries: Shuttle Hooklift

    Stellar is the only manufacturer in the U.S. that builds Shuttle hooklifts. As with all Stellar Hooklift Trucks, simplicity of design and operation are a top priority. As a matter of fact, our shuttle hooklift trucks are very economical and easy to operate because there are fewer functions that operators need to be trained on.

    Stellar Hydraulic Shuttle Hook Lift Trucks can handle a variety of bodies ranging from flatbeds to recycling containers to dump bodies and more. Two independently controlled cylinders operate all the functions of our shuttle hooklift trucks.

      The Stellar Shuttle consists of four basic parts: base, dump, secondary and tilt sections:
    • Base: All Stellar Hooklift hoists are tied together in one common framework. This base section, or subframe, not only adds strength to the hoist but also places less stress concentration on the truck chassis by providing additional structural support. The base section also provides for simple installation on most truck chassis.
    • Dump: This component pivots at the rear of the hoist and when the tilt engages the patented dump latch tabs, allowing for the container dumping function. The rear-body latches are attached to this component on all models, allowing the body to remain in the latches while in transit and dumping.
    • Secondary: The secondary section acts as the main pivoting member for loading and offloading bodies. This component ties the tilt and dump sections together into one cohesive unit.
    • Tilt and Dump Latch: This unique patented feature is the basis of the Stellar Hooklift system. With a simple mechanical engagement between the tilt section and the dump section, the pivot point is changed from the secondary section (loading/offloading) to the rear of the truck (dumping). Resettable tabs protect the system from out-of-sequence operation.
    • Tilt Cylinder: The tilt cylinder operates the tilt section of the Stellar Hooklift and features a pilot-operated counterbalance valve on both extend and retract sides. With Stellar’s unique twin-post design, line-of-sight visibility of the hook is available from the truck cab.

    All Stellar Hooklift Trucks for sale feature permanently lubricated greaseable bushings, our patented dump/load interlock system and an efficient low-flow, high-pressure hydraulic system. Gravity-type safety latches are used to prevent accidental detachment of the body, while rugged rear-body tiedowns ensure body stability when in transit.

    Only Stellar Hooklifts provide a full-length dump frame with front saddles to support the body during the dump mode. What’s more, our hooklift trucks for sale allow one truck operator to load and unload or change bodies without leaving the cab of the truck. All the hooklift controls are mounted in the truck cab for ease of operation.

    Summit Body: Cutaway Vans

    Summit’s Cutaway vans are ideal for many types of deliveries, rentals, cargo freight, mobile service, and easy handling and transporting of boxed products.

    Standard equipment on all of our Cutaway vans includes:
  • Summit’s fuel-saving, aerodynamic front end
  • Our laminated hardwood floor
  • LED interior and exterior lighting
  • A translucent fiberglass roof that lets in the right amount of light
  • A stainless steel rear frame and front corners that will look good after years of use
  • Composite doors that won’t fade, chip or peel
  • Indestructible composite liner slats made from recycled material
  • Summit Body: Dry Freight

    Whatever your Dry Freight needs – deliveries, rentals, cargo freight, mobile service truck, or airport drayage – we’ll work with you to design a truck body that keeps your loads secure and out of the weather. With Summit, you’ll maximize productivity and payload.

    Standard equipment on all of our Dry Freight van includes:
  • Summit’s fuel-saving, aerodynamic front end
  • Our laminated hardwood floor
  • LED interior and exterior lighting
  • Translucent fiberglass roof that lets in the right amount of light
  • Stainless steel rear frame and front corners that will still look good after years of use
  • Composite doors that won’t fade, chip or peel
  • Indestructible composite liner slats made from recycled material
  • Sun Country Truck: SCT Flatbed

    Sun Country has wood truck beds and flatbed tow trucks available. Our flatbeds and stake bed trucks come equipped with a durable 12-gauge steel diamond plate floor and custom Sun Country mud flaps. Our flatbed trucks and flatbed trailers also include DOT LED marker lights, stake pockets, headboard, and an ICC bumper.

      STANDARD FEATURES
    • Headboard
    • ICC Bumper
    • DOT LED Marker Lights
    • Sun Country Mud Flaps
    • Stake Pockets
    • 6" Long Member
    • 12" On Center Crossmember
    • 12-Gauge Steel Diamond Plate Floor
    Sun Country Truck: SCT Chipper

    Clean up with our premiere dump body - the SCT Chipper. Specify your cargo size, and we’ll fabricate a custom truck body with accessories tailored to your needs.

    Dump box is fully enclosed with custom ventilation and a swing-open side door. Features a flat base above the floor, ideal for cab-over trucks. It provides clearance for frame-mounted battery boxes and tanks such as a custom water cooler holder.

    Two stationary shelves plus floor storage provide ample room. Stainless steel locking T-handle latches and gas spring door openers offer convenient access. Two full-height doors with stainless steel, 1/4 in. pin continuous hidden hinges.

    Automotive style rubber D-bulb sealed doors and a built-in rain gutter protect against weather and grime. Built-in frame mounting rails save time on installation and eliminate interior holes.

    Sun Country Truck: SCT Landscape

    Sun Country Truck bodies can be engineered to be any size or shape. With the use of high-quality parts and accessories, the SCT Landscape is built to your exact specifications. Buyers and Weather Guard storage chests and tool boxes are just a few of the brands we have in our inventory. In addition, Sun Country Truck is a distributor of Whelen lighting systems. These enable us to install specialty lighting not just for landscaping and dump bodies but also for service bodies and flatbeds. We also provide a variety of other services, including but not limited to manufacturing, custom fabrication, and repairs.

    We can customize stake bodies for varying lengths and to accommodate dry freight boxes. Our landscape bodies can employ stationary beds with latch doors or utilize a hoist system dump body.

    Thermo King: Direct-Drive

    Every day your business faces new challenges - increasing fuel costs, new idling and noise regulations, food safety, driver turnover - all while you’re expected to continue to deliver the freshest product possible to your customers. That’s where Thermo King comes in. With a full range of vehiclepowered units to suit your needs, from straight trucks to delivery vans, or groceries to home-cooked meals, Thermo King has the temperature control solution for you.

    Taylor Pump & Lift: Lube Truck

    Looking for a mobile lubrication solution without the cost investment of a full lube truck? A custom-built lube trailer is the perfect match for you! Complete with full-size product tanks and built with high quality, authentic parts from leading suppliers, each lube trailer provides adequate mobility and efficient servicing equipment.

    Versatile enough to leave on job sites overnight and mobile enough to easily transport with a pickup truck, our lube trailers are key in keeping your operations running smoothly.

    TruckCraft: Aluminum Service Bodies

    TruckCraft’s LANCER is a green-focused aluminum service body available for Single rear wheel pickups and Dual rear wheel cab/chassis that will save fuel every driven mile while providing years of secure storage. The deck floor and under structure are made from custom-designed aluminum alloy extrusion with tensile strength equivalent to steel for real durability but weighing in at only 640 lbs. (SRW) 840lbs (DRW).

    Combine powder-coated cabinet doors, the near-zero maintenance of aluminum, stainless steel hardware and you get TruckCraft’s great fuel saving service body that will likely be moved on to your next truck.

    The details of the Single or Dual wheel LANCER are where the value of this TruckCraft-designed body really shines through. Compare the welded double panel door construction, stainless steel door hinges, the black and chrome twist lock T handles, bright diamond plate cabinet tops and adjustable cabinet shelving, and we believe you’ll see greater value than in any other comparably priced service body.

    How about these additional features – single handle top-drop/slam-shut tailgate, gas springs on vertical doors, rubber mounted LED lights with factory wiring harness, D-bulb style rubber door weather seal, and a one-year “limited” factory warranty.

    Warner: Select Pro

    The Select Pro features an innovative body with flush-mounted doors and a Warner Bodies stainless steel concealed hinging system. With an aerodynamic rounded top, the industry leading Select Pro provides more storage, better security and improved durability at a value driven price.

    VanTech: Aluminum Angled Shelving

    Fits fullsize vehicles such as Ford Econolines, Chevy Express, GMC Savana, Dodge Ram, Freightlinger/Dodge/Mercedes Sprinter Low Top, Dodge Promaster Low top, Nissan NV Cargo Van Low Top or any vehicle with a 48? Clearance. Allows for storage for tools, hardware, materials, and other items. This product is for a 48? wide Shelving unit. 42? and 60? Shelving units are available in other listings.

    Venco Venturo: Crane Mechanics Body

    Venturo Crane Bodies are designed and manufactured for Venturo service cranes. They provide the optimum foundation for the crane and for your worktruck. Venco Venturo manufactures RUGGED and strong crane bodies.

    They are built RELIABLE and long-lasting, and we have REAL expertise in serving as your number one industry resource. Our 25,000 FT-LB, 40,000 FT-LB, 50,000 FT-LB and 66,000 FT-LB crane bodies are designed to provide enough storage while boosting capacity to lift your maximum loads.

    U.S. Truck Body: Aluminum Van

    U.S. Truck Body’s Aluminum truck body has set a new standard in its class through decades of evolution. This sheet and post body combines premium materials and optimum manufacturing processes resulting in a body that will take abuse and continue to look good over the years.

    The bodies are available in lengths from 10’ to 28’ and with a wide range of heights and widths. Choose from a standard or completely custom interior, a variety of doors, bumpers or liftgates and we’ll build a body that fits your application.

    U.S. Truck Body: Dry Freight Duraplate

    Our DuraPlate utility truck bodies are designed to provide maximum capacity and corrosion resistance, while providing a smooth exterior that’s perfect for graphics.

    DuraPlate® is durable material that is commonly used in construction of semi-trailers. The panel is constructed of a high-density polyethylene (HDPE) core, bonded between two sheets of pre-coated galvanized steel skins. These materials produce a composite panel that is extremely strong, lightweight, and damage resistant.

    U.S. Truck Body: FRP

    A general purpose high cube dry freight van body, with added space as the primary advantage of the Fiberglass Reinforced Plywood construction. The absence of exterior seams and rivets provides an ideal surface for custom decals and painting. FRP is also very durable and dent resistant. Our FRP bodies utilize the same quality construction of our aluminum bodies including DuraPlate® swing doors and stainless steel bar lock hardware.

    U.S. Truck Body: Moving Body

    Our moving bodies have been developed with industry leading movers and tailored to their unique needs. Moving companies need a specialized body that will hold up under heavy use, shifting loads, and unique delivery demands. This body is built with many of the same industry leading features of our aluminum body, but with a variety of unique features that make the job much easier.

    UTEM: Skyjacker

    An articulated/non-overcenter aerial device great for lighting and sign contractors, municipalities, school districts, and universities. Units feature an exclusive 540º boom rotation with hourglass worm gear drive for smooth operation.

    The Utility Bodywerks: Aluminum Hauler Body

    Top of the Line Aluminum Hauler Bed

    Working with Utility BodyWerks is easy and completely custom! By using their custom hauler builder, you will be able to assemble a hauler that meets your every need while having complete control of the look right down to the paint and trim. They engineer the latest technology and design into every model and their all aluminum bed will last longer, increase your towing capacity and improve your fuel mileage.

    Their all aluminum hauler bodies are durable, functional and stylish. Whether it’s for work or play, they can build a truck body that will meet your needs. Increased towing capacity, ample storage and options galore.

    If you have your own truck or maybe you’re interested in a new one, let them help you through the process every step of the way.

    Voth Truck Bodies: Dump Body

    The Voth Unibody design features a one-piece floor, smooth understructure and low mounting height. Voth’s signature design, this unibody dump is manufactured for heavy duty service, without turning your truck in to an oversized dump truck. The low mounting height allows for a low center of gravity with increased stability on the road and on the job site.

    Voth Truck Bodies: Urban Forestry

    Deep in the forest, or the urban jungle, Voth’s line of forestry chipper bodies is the solution for your work in the tree care industry. The Urban Forestry Body is your solution to aerial tree care and removal.

    Wabash: Cargo

    City streets and neighborhood roads are no contest for the Wabash Cargo Body. The low-profile design and exceptional maneuverability make for a smooth ride. Designed for practicality and flexibility the Wabash Cargo cutaway is the solution to get in, get out, and move on to the next stop.

    Warren Truck Equipment, Inc: Aluminum Dump Body

    Warren offers the strength of steel and the weight advantages of aluminum. An increased payload potential of up to 2,200 pounds, or a one third weight reduction is achieved when compared to similar steel bodies. Extra profit is generated with every load. Eliminate corrosion and painting costs incurred with comparable steel units. This not only saves you money, but you receive the added benefit of an outstanding appearance for years to come. At trade in time, aluminum historically retains 70% of its original value. In the long run, Warren aluminum will save you money and look good doing it. The premium quality Warren aluminum is a great investment. Consider your next dump body purchase the value loaded Warren.

    Standard Body Features:

    • Length: 10’ to 22'
    • Longitudinal: I-Beam 6” X 6.1 # 6061-T6 with Integral Track for Mount Rubber
    • Top/Bottom Rail: 4” Boxed Top, Extruded 6061-T6 Alloy / Extruded Aluminum 6061-T6 w/Integral Inner Clean-Out
    • Floor Material: .250” Alloy, 5083-H32
    • Bulkhead: .190” Bulkhead Continuous Welded
    • Sides: .160” Alloy, 5454-H34 STD .190” & .250” Optional
    • Tailgate: .190” Plate, 5454-H34, Extruded 6061-T6 Braces, 3 1/2” Air Cylinder Operated Latch, Steel Bolt-On Hinges
    • Vertical Uprights: 8” Extruded 6061-T6 Alloy
    • Ladder: Non, with Many Options Available
    • Cross Members: 4” I-Beam Extruded 6061-T6 on 12” Centers
    • Paint: Several Standard Colors / Optional Colors Available

    Hoist Features:

    • Model: VTLW Frameless, Class 90 Through 120
    • Tanks: Upright, Poly. with Shut Off Valve
    • Dump Hinges: 2 5/16” – Dia. H.D. Rear Hinge Assembly
    • Hydraulic Pump: Direct Mount, Cast Iron Housing w/Relief Valve
    • Control Valve: 8.25 X 22.5 STD.
    • Tires: Air Shift
    • Controls: Console Type – Air Shift on PTO
    • Cylinder: Front Telescopic NTEA Rated with Frameless Hoist
    Warren Truck Equipment, Inc: U-252 Dump Body

    Warren U-252 bodies are built for top on-the-job performance in day-to-day operation. This body is ideal for trucks having 10,000 GVWR and above. The U-252 bodies are intended for use in hauling most materials used by landscapers, nurserymen, asphalt parking lot & driveway pavers, as well as municipal and park service maintenance crews. Pair the U252 dump body with a Warren WSC-5519 hoist, Venco hoist, or purchase less hoist assembly.

    Features & Benefits of Warren U-252 Bodies:

    • Dimensions:
      • Lengths –8’4?, 9', 10', 11'
      • Overall Width: 96?
      • Inside Width: 87?
    • Construction: ASTM A1011 A-45 High Tensile Stee
    • Understructure:
      • 3” – 4.1#/ft. Channel Crossmembers Standard
      • 5” – 6.7#/ft Channel Long Rails Standard
    • Floor: 10 Gauge Steel – 82” Inside Width w/ Radius Edges
    • Sides:
      • 10 Gauge Steel; 18” Standard Height
      • Front & Rear Gussets 6? High w/ Sideboard Pockets
      • Full Depth Rear Corner Posts & Skirt
      • Dirt Shedding, Sloped Rub Rails
    • Tailgate:
      • 10 Gauge Steel; 6” Higher Than Sides
      • Boxed Perimeter Bracing
      • Double Acting w/ Support Chains
    • Front Bulkhead: 10 Gauge Steel; 6? Higher Than Sides
    • Full Depth Rear Corner Post
    • Continuous Welding Throughout Body for Additional Strength
    Warren Truck Equipment, Inc: U-F 451 Dump Body

    Warren 451 Series dump bodies are designed for mounting on medium duty single axle truck chassis. They have strong “Stacked Type” understructure for extended life. Engineered for contractors and governmental agencies for hauling sand, gravel, asphalt mix and other materials. Double acting, air operated tailgate with underbody arm or telescopic hoist.

    Features & Benefits of Warren U/F 451 Series Bodies:

    • Dimensions:
      • Lengths –9', 10'
      • Overall Width: 96?
      • Inside Width: 87?
    • Construction: ASTM A1011 A-45 High Tensile Steel
    • Floor: 3/16? Steel w/ 2? Side to Floor Radius
    • Understructure:
      • 3” – 4.1#/ft. Channel Crossmembers
      • 5” – 9.0#/ft Channel Longitudinals (U9-451 and U10-451)
      • 5? – 6.7#/ft Channel Longitudinals (F10-451)
    • Sides:
      • 10 ga. Steel w/ 4 x 4 x 1/8? Boxed Tubing Top Rail
      • 3 Per Side 6? Wide Boxed Side Braces
      • 6? High Front & Rear Gussets w/ Board Pockets/li>
      • 8? Full Depth Rear Corner Post
      • Dirt Shedding Rub Rails
    • Tailgate:
      • 10 ga. Steel
      • 6? Higher Than Sides
      • Boxed Perimeter w/ Vertical Bracing
      • Double-Acting
      • Air Operated Control Lock
      • Double Lower Sockets w/ Overhooks
    • Front Bulkhead:
      • 10 ga. Steel w/ Die-Formed Horizontal Brace
      • Dog House
      • 6" Higher Than Sides
    • Body & NTEA Rated Hoist Manufactured by Warren
    • Continuous Welding Throughout Body for Additional Strength
    • 8? Wrap Around Front Corner Post
    • Full Depth Rear Corner Post
    Weather Guard: General Service

    The WEATHER GUARD General Service/Contractor Van Packages are specially designed to aid in streamlining van setup, providing a custom storage solution that works for you without the hassle of picking out products individually. The packages feature a pre-selected assortment of van accessories chosen specifically for basic jobs and worksites. These packages cater directly to general service providers and often include accessories such as a van bulkhead, adjustable van shelving, drawer cabinets, shelf doors, and Pack Rat pull out storage and accessories.

    With the work van equipment, cargo van shelving, and other van products included in these comprehensive packages, you’ll be able to hit the road quickly to head to jobs, while making the setup of your commercial van interior convenient and painless. Additional van products are also available to create a more uniquely customized van solution.

    Western: Snowplow

    Located in Milwaukee, Wisconsin, Western Products is the leading manufacturer of snow and ice control attachments with more than 70 years’ experience. A full line of CONTRACTOR GRADE snowplows and salt/sand spreaders are available for commercial, personal, and light municipal snow removal. Our promise is built into every piece of equipment we make: MORE JOBS. DONE FASTER.

    Wil-Ro: Removable Dovetail Landscape

    Meet the industrious Removable Dovetail Landscape truck body that takes your work truck to the next level. Wil-Ro’s expert design of this American-made truck bed offers a rare functionality not found in competitors’ products by providing the flexibility needed for creating an impressive landscape.

    Your jobs often differ from project to project, whether it’s property maintenance or landscape design. You need landscape trucks that offer the necessary adaptability for your tools and gear.

    Wil-Ro: Standard Dovetail Landscape

    Creating landscape bodies that work for your truck and business is one of the things we do best. Wil-Ro caters to the landscaping world’s needs by providing beds to the landscaping trucks focused on strength, performance and dependability.

    Our Standard Landscape truck body takes the guesswork out of what you’ll need for your groundskeepers and crews to be productive with its excellent storage, accessibility and utility features.

    Body Features:
    • Lengths (12', 14’, 16’)
    • Double Break Dovetail
    • Fold-Down Sides
    • Headboard Storage Box
    • Rake And Shovel Holder
    • Water Cooler Holder
    • D-Rings For Securing Equipment
    • Spilt Spring Assist Ramps
    • Lockable Trimmer Rack
    Womack Truck Body: Dovetail Landscape
    Landscape Body Standard Features
  • 60" Wire Head Board
  • 24" Lockable Top Compartment
  • 16" Wire Rail / Fold Down Curb Side
  • Diamond Plate Floor / Steps & Handles
  • 60" Spring loaded Split Rear Gates
  • Zanotti: Invisible Direct-Drive

    Our Invisible range is designed for discreet and efficient transportation of refrigerated products in vans. These units are installed underneath the vehicle chassis, completely invisible from the outside, preserving the aesthetics, original height and aerodynamics of the vehicle, while reducing bodywork. SFZ007, SFZ008 and SFZ009 offer varying refrigeration capacities and volume ratings tuned for different applications. SFZ009 Multi features dual evaporators to enable products with different temperature requirements to be transported in two separate zones.

    The Invisible range, with its ultra-thin dimensions make it the ideal choice for customers who need a space-saving solution. A driverfriendly interface in the cabin allows real-time monitoring and control of the unit performance to ensure the cargo is maintained at precisely the right temperature throughout the trip.